hike Posted January 16, 2014 Share Posted January 16, 2014 I had the Diamond Design Driver which works fine for my V2 Roku.But I also have a V3 and it does not work for that one.Anyone know of a working driver for Roku 3 that I can use on my 1.7.4.36 system? Link to comment Share on other sites More sharing options...
SMHarman Posted January 17, 2014 Share Posted January 17, 2014 They use the same up command set so it should work. Does the DD driver need a new Mac address assigned to it? Sent from my LT26i using Tapatalk Link to comment Share on other sites More sharing options...
hike Posted January 17, 2014 Author Share Posted January 17, 2014 It only asks for the Mac address of the primary controller and it inputs that automatically. Link to comment Share on other sites More sharing options...
hike Posted April 12, 2014 Author Share Posted April 12, 2014 I'm still having issues with this so thought I'd bump it up. Any help would be appreciated! I had the Diamond Design Driver which works fine for my V2 Roku.But I also have a V3 and it does not work for that one.Anyone know of a working driver for Roku 3 that I can use on my 1.7.4.36 system? Link to comment Share on other sites More sharing options...
chicagoskiguy Posted April 12, 2014 Share Posted April 12, 2014 I have the Diamond Design Roku Driver. I had it with 1.7.4.36, and after upgrading to 2.x. I've never updated the driver, and it worked with an older Roku, as well as my current Roku V3. Do you have 1 or 2 Roku's in your system currently? If you added a Roku, was the other Roku added to your project? If you replaced your Roku, are you sure the old Roku and the new Roku have the same IP Address? Roku if I recall does not allow you to set a static IP Address, so you would have to do a DHCP reservation in your router. If you make sure that the old Roku, and the new Roku have the same IP address, I would think everything would work. When I swapped out my older Roku for a newer one, this is the procedure I used. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.