Bubben Posted May 19, 2014 Share Posted May 19, 2014 Im trying to program my integra 60.5 to set different input on main- and 2:nd zone. But I cant find the way to do it, anyone had any luck with this? I've previosly tried the same with a yamaha-receiver, but the programing-options looked the same. I do find a credential that says " if zone2 video input is set to...", but nowhere to actualy set zone2 hdmi to any input. Also, is realy trigger-option removed from the new Integra-drivers? I used to have a integra 70.2 and that driver could take full advantage of the trigger-ports. Link to comment Share on other sites More sharing options...
Matt Lowe Posted May 19, 2014 Share Posted May 19, 2014 C4 is advising against installing video zone 2 last time I spoke with tech support. I was able to overcome it with some simple programming though. basically just set up fake devices and said when device a is selected put output 2 to input x and ran like a charm. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.