kemik Posted October 29, 2015 Share Posted October 29, 2015 Hi, Has anyone connected a keylite automated blind/window controller to their project? Here's the documentation https://www.keyliteroofwindows.com/media/1923/tf24r-controlpanel.pdf If so what wiring did you use? Thanks Link to comment Share on other sites More sharing options...
SimonSparksUK Posted December 31, 2015 Share Posted December 31, 2015 Did anyone ever reply to you regarding this question? As I also have the Keylite TF24R Control Panel for 2 windows and 2 blinds. I am a developer so I would be more than happy to write a driver for this if someone could give me a bit of a helping hand, I'll do all the coding I just need a few pointers to get started. Link to comment Share on other sites More sharing options...
SimonSparksUK Posted December 31, 2015 Share Posted December 31, 2015 I have wired up the Keylite TF24R to my Control4 HC-800 using a Cat6 patch cable therefore I have 8 cores, 4 for the common and 4 for the normally open. Link to comment Share on other sites More sharing options...
SimonSparksUK Posted April 19, 2017 Share Posted April 19, 2017 No I never managed to find any useful information on how to make this work. I am now looking for a 3rd party controller for 2 windows and 2 blinds. Link to comment Share on other sites More sharing options...
Matt Lowe Posted April 19, 2017 Share Posted April 19, 2017 looks like these are controlled by relays. so you will need two relays per shade. your hc800 has 4. so you can control two shades. io extenders have 8 so you can control 4 shades. Link to comment Share on other sites More sharing options...
thegreatheed Posted April 19, 2017 Share Posted April 19, 2017 or there's the wireless contact/relay extender that has 2 relays each. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.