Max Averbuch Posted January 20, 2017 Share Posted January 20, 2017 Hi all, When an alert is trigger i.e alarm or water sensor send alert my system send an email currently to 3 email addresses. I tried adding a 4th address and when I do a test email it sends to all 4 but when i.e alarm is put into stay or away it only sends the alert to the first 3 emails. Is there a limit on the no of email addresses that can be sent simultaneously. Would appreciate any help. Max Link to comment Share on other sites More sharing options...
Cyknight Posted January 20, 2017 Share Posted January 20, 2017 Changing the email addresses in the agent will NOT change the addresses in the existing programming, you'll have to reprogram the actual sending of the email. Link to comment Share on other sites More sharing options...
Max Averbuch Posted January 20, 2017 Author Share Posted January 20, 2017 Hi Cyknight when I look under the programming I do see the 4th email address. Am I missing something Max Link to comment Share on other sites More sharing options...
Cyknight Posted January 20, 2017 Share Posted January 20, 2017 1 hour ago, Max Averbuch said: Hi Cyknight when I look under the programming I do see the 4th email address. Am I missing something Max WHERE in programming - ie WHEN button is pushed send email to a,b,c,d? or WHEN button is pressed send email to a send email to b etc Either works. If so I'd check the email address, and/or it's spam folders. There is no limit to the number of addresses, at the very least it isn't set at three. Link to comment Share on other sites More sharing options...
VINCELdUB Posted January 21, 2017 Share Posted January 21, 2017 On the right side of programming the email template will update however in the centre your script with the green arrow will not show all four email addresses you will have to replace it with the new template now that you've updated it Happy Automating! Link to comment Share on other sites More sharing options...
Max Averbuch Posted January 24, 2017 Author Share Posted January 24, 2017 Hi Vinceldub. Thanks for your post. I pulled up each script for the alarm and dragged the green arrow with the email notification. It send the email but it is sending twice to the first 3 emails and then once to the new email. I am new to this but am reasonably literate with pc's etc. I looked under all the device actions to see if I could find the old email entries. It seems with the new entries the old ones are still resident. I would have thought that when you went to the script under device variables you should be able to see the old entry (green arrow ) that was moved across from you device actions Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.