mandiola Posted March 7, 2018 Share Posted March 7, 2018 Has anyone had any issues with their T3's hanging? Mine seems to have started hanging after upgrading to 2.10.x. The screen will work fine for a few hours, sometimes up to a full day, and then will stop responding. I normally use the blank screensaver so I couldn't tell if the lcd was just shutting off or the backlight was going out. Today I tried setting it to the clock screen saver and when I got home from work it was frozen showing the time around 4PM so its not the lcd or backlight. It will working fine after unplugging or holding the power button to restart until it decides to freeze again. I've tried reseating the cable, resetting, and also changing the screensaver but the issue remains. Anything else I could try? Thanks! Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted March 7, 2018 Share Posted March 7, 2018 are you on 2.10 or 2.10.1 We had one of ours hang a couple of times on 2.10 but did a reboot from HE and everything was fine. 2.10.1 not seen this issue Link to comment Share on other sites More sharing options...
mandiola Posted March 7, 2018 Author Share Posted March 7, 2018 It happens on both. I was hoping 2.10.1 would fix it but unfortunately it did not. Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted March 7, 2018 Share Posted March 7, 2018 We have 3 touchscreens and do not have this issue on 2.10.1 - Sorry Link to comment Share on other sites More sharing options...
knowitall Posted March 7, 2018 Share Posted March 7, 2018 POE switch or injectors? Any additions to network recently? Reboot the controller? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.