Xav Posted June 19, 2018 Posted June 19, 2018 Hello all, As anyone been controlling the Crown Amplifier Cdi 2|600 in composer? I have been looking for the driver unsuccessfully. If anyone as already integrated this type of Crown amp would it be possible to have a couple of basic info on how to control it that will be great. Many thanks in advance! Xav
lippavisual Posted June 19, 2018 Posted June 19, 2018 12v trigger should be all that is required to power ON/OFF.
Xav Posted June 19, 2018 Author Posted June 19, 2018 Thanks for your reply ! 12V comping from where? C4 controller? and where do you apply the 12V on the Amp? Do you refer to the AUX Port to put the unit ON/OFF Sleep (see attached) Many thanks again for your time!
lippavisual Posted June 20, 2018 Posted June 20, 2018 Yup, exactly that. Sorry its been a bit since I've worked with that particular model. But you would actually use just a controllable relay from either a C4 controller or another controlled device. When relay closes, amp sleeps. When relay opens, amp is on.
aamaya Posted August 7, 2019 Posted August 7, 2019 On 6/19/2018 at 7:04 AM, Xav said: Hello all, As anyone been controlling the Crown Amplifier Cdi 2|600 in composer? I have been looking for the driver unsuccessfully. If anyone as already integrated this type of Crown amp would it be possible to have a couple of basic info on how to control it that will be great. Many thanks in advance! Xav which driver did you use to control the amp.
thegreatheed Posted August 7, 2019 Posted August 7, 2019 The Triad power amp driver will give you a relay connection.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.