GadgetBazza Posted December 2, 2018 Share Posted December 2, 2018 Hi, i have a sky box as one of the sources in my whole house system. The volume level on the sky box is significantly lower than other sources which can be a real pain when switching between sources in the same room as the volume will belt out when switching from sky to something else. on AV amps I’ve seen settings to allow the volume to be adjusted on each source, can the Leaf 862 do something similar? Are there any other solutions? Thanks Link to comment Share on other sites More sharing options...
Cyknight Posted December 2, 2018 Share Posted December 2, 2018 Not by source, no. It will for a large part depend on how you 'get' the audio to the amplification point - is it HDMI fed to a receiver, is it going into a C4 amplifier, HOW is the LEAF used to get it there.... Link to comment Share on other sites More sharing options...
GadgetBazza Posted December 2, 2018 Author Share Posted December 2, 2018 The leaf is just being used to switch hdmi sources, so straight to tv’s in the rooms and receiver in the cinema. Problem exists on all tv’s because the sky output volume is low. Link to comment Share on other sites More sharing options...
Cyknight Posted December 2, 2018 Share Posted December 2, 2018 Then no, HDMI volume levels are not adjustable. I would look at the SKY boxes themselves though, you may find that they have an audio adjustement level along the lines of 'TV speakers' and 'surround receiver' Link to comment Share on other sites More sharing options...
GadgetBazza Posted December 2, 2018 Author Share Posted December 2, 2018 Will take another look. It seems the sky volume level is well documented on the internet with no on board fix. Thanks for confirming. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.