hunger Posted February 24, 2019 Share Posted February 24, 2019 The power supply in my HC-300 has given up the ghost, its power supply has been discontinued by its manufacturer and none are available through distribution, and I was unable to find a suitable drop-in replacement, so I was looking into my options. I can buy a used HC-300 on eBay and use its power supply or I can look to the future since the HC-300 is not supported on 2.10. My current setup is an HC-800 and an HC-300, running on 2.9.1, so maybe I should replace the HC-300 with an HC-250, or replace the HC-800 with an EA=3 and the HC-300 with the HC-800, or replace the HC-300 with an EA3. Any opinion as to the best option? Regardless, is there a publicly-accessible source of information that shows the first and last versions of the Control4 software that work with the various Controil4 hardware devices, including extended support (continues to be supported but no new software such as the Speaker Point)? Link to comment Share on other sites More sharing options...
msgreenf Posted February 24, 2019 Share Posted February 24, 2019 Ea3 is the best option. Hc250 are nearing end of life Sent from my Pixel 3 using Tapatalk Link to comment Share on other sites More sharing options...
hunger Posted February 24, 2019 Author Share Posted February 24, 2019 Thanks. So which should be the master, the HC-800 or the EA-3?Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
msgreenf Posted February 24, 2019 Share Posted February 24, 2019 Ea3Sent from my Pixel 3 using Tapatalk Link to comment Share on other sites More sharing options...
hunger Posted February 24, 2019 Author Share Posted February 24, 2019 Thanks!Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Pounce Posted February 25, 2019 Share Posted February 25, 2019 For about 8 bucks you can get a wallwart with those specs off amazon. Link to comment Share on other sites More sharing options...
hunger Posted February 25, 2019 Author Share Posted February 25, 2019 Thanks , Pounce. I hadn't thought of that! I probably have one sitting around. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.