Dinushan Paranavithana Posted July 18, 2019 Share Posted July 18, 2019 I'm trying to create an IR Driver for a Samsung TV. However, the remotes power toggle button is the only command that will be read by the controller. When i press the other buttons, the controller is not accepting the IR commands sent by the remote. Remote buttons are fine as it works directly with the TV. I have also attached an image of the remote. What should be done in order to assign the IR commands of other buttons of the remote to the controller? https://www.dropbox.com/s/1o7o7p3b06tkvvm/Photo 7-18-19%2C 3 52 13 PM.jpg?dl=0 Quote Link to comment Share on other sites More sharing options...
sonic30101 Posted July 18, 2019 Share Posted July 18, 2019 Try the un65js series IR driver in the database you shouldn't have to learn commands for that. It will also have discrete power commands. That remote may have bluetooth power toggle I am not sure since that remote does pair to the TV Quote Link to comment Share on other sites More sharing options...
Dinushan Paranavithana Posted July 18, 2019 Author Share Posted July 18, 2019 3 hours ago, sonic30101 said: Try the un65js series IR driver in the database you shouldn't have to learn commands for that. It will also have discrete power commands. That remote may have bluetooth power toggle I am not sure since that remote does pair to the TV Hi @sonic30101 Thanks for the reply but that driver didn't work. But i found another driver which works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.