avintegrator Posted June 8, 2009 Share Posted June 8, 2009 I am trying to create a driver for a Precision Pro8100 projector. I am having issues with changing the Protocol in the Manual to a IR file that Control4 is looking for. The Manual shows it is an NEC protocolBut if i am using Makehex from Remote Central I'm not able to make it generate codes that work. It's been a while since i needed to convert one of these files, can someone point me in the right direction again. ThanksCommand Function Name Description0x87 Power On Discrete Power On.¹Power On/Off Toggle Power On/Off.²0xA1 Power Off Discrete Power Off0x9E PC Direct PC select0x9B Component Video Component 1/2 browse0xA3 Component 1 Direct Component 1 select0xA4 Component 2 Direct Component 2 select0xA6 CV/S-Video CV/S-Video browse0x9C S-Video Direct S-Video select0x9D CV Direct CV select0x9A HDMI HDMI 1/2 browse0xA7 HDMI 1 Direct HDMI 1 select0xA8 HDMI 2 Direct HDMI 2 select0x91 Picture Mode All mode browse0xBA Picture Mode All All mode browse excl. user.0xBB Cust 1 Custom mode 10xBC Cust 2 Custom mode 20x92 Color Temp Color Temp browse0x8E Aspect Ratio All AR browse0xBD Normal AR Normal AR browse0xB8 Anamorphic 1 Anamorphic 1 AR direct0xB9 Anamorphic 2 Anamorphic 2 AR direct0x93 Lens ShiftCommand Function Name Description0x94 Zoom/Focus Zoom/Focus toggle0x8D V/H Keystone V/H Keystone toggle0x82 Up0x85 Down0x83 Left0x81 Right0x86 Enter Confirm selection0x84 Menu Open/Exit OSD0x90 Exit Cancel selection0x95 PCS PCS browse0x96 Daylight Sensor DS browse0x97 Overscan Overscan browse0x98 Black Level Black Level browse0x99 HQV HQV enable0x80 Freeze Image freeze0xB0 Lens Shift Right0xB1 Lens Shift Left0xB2 Lens Shift Up0xB3 Lens Shift Down0xB4 Focus +0xB5 Focus -0xB6 Zoom +0xB7 Zoom - Link to comment Share on other sites More sharing options...
ILoveC4 Posted June 8, 2009 Share Posted June 8, 2009 You need PRONTO codes. Link to comment Share on other sites More sharing options...
ILoveC4 Posted June 8, 2009 Share Posted June 8, 2009 There is a program called CCF2EFC that I found online that converted the codes for me.Good luck. Link to comment Share on other sites More sharing options...
ILoveC4 Posted June 8, 2009 Share Posted June 8, 2009 K&J hasn't chastised you yet?Wait for it.....wait for it.....=) Link to comment Share on other sites More sharing options...
avintegrator Posted June 8, 2009 Author Share Posted June 8, 2009 K&J hasn't chastised you yet?Wait for it.....wait for it.....=)I'm afraid, chastised for what? Link to comment Share on other sites More sharing options...
ILoveC4 Posted June 8, 2009 Share Posted June 8, 2009 He yells at people for asking about creating drivers with common folk (read idiots) like myself. Link to comment Share on other sites More sharing options...
RyanE Posted June 9, 2009 Share Posted June 9, 2009 ILoveC4,Can't you just drop it already?I for one am tired of hearing you complain about K&J, which seems to be happening more often than K&J actually complaining himself.RyanE Link to comment Share on other sites More sharing options...
ILoveC4 Posted June 9, 2009 Share Posted June 9, 2009 Consider it dropped. Link to comment Share on other sites More sharing options...
alanchow Posted June 9, 2009 Share Posted June 9, 2009 post on the dealer forum or call c4 tech support. Link to comment Share on other sites More sharing options...
avintegrator Posted June 9, 2009 Author Share Posted June 9, 2009 post on the dealer forum or call c4 tech support.Thanks Alan, i did the 1st and i'll do the second tomorrow Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.