gwagner Posted June 3, 2020 Share Posted June 3, 2020 I currently have 4 Wirepath 750 cameras integrated to my C4 system running 2.10. I have recently acquired a SnapAV Luma 500 4 channel NVR that I also want to integrate for recording. The Luma NVR has a single network LAN port for camera viewing and management plus 4 POE ports for the cameras. The issue I'm facing is that the existing cameras do not home run to the NVR location, rather they connect to network LAN switches located throughout my house. So....my question is: Can the Luma 500 NVR be configured to access cameras that appear on the NVR's LAN port as opposed to the NVR's dedicated POE camera ports? Quote Link to comment Share on other sites More sharing options...
lippavisual Posted June 3, 2020 Share Posted June 3, 2020 Should be able to. You would just be manually adding each camera's IP info. Quote Link to comment Share on other sites More sharing options...
gwagner Posted June 4, 2020 Author Share Posted June 4, 2020 Yep, figured it out. Thanks for the confirmation. Not obvious from the documentation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.