ejn1 Posted October 3, 2021 Share Posted October 3, 2021 Curious for thoughts on this one... I have a FrameTV with a one connect box. I also have a Denon AVR that is used now for HDMI switching and TV/Music audio to a pair of KEF LS50's. I have some higher end separates not in use but not 4K HDMI rated. Is there any watch outs or concerns using the one connect box for all HDMI switching and then running a digital output from the one connect box to the AVR to handle all audio outputs for both Video and Music? Thanks! Quote Link to comment Share on other sites More sharing options...
sonic30101 Posted October 3, 2021 Share Posted October 3, 2021 Toslink out is lower audio quality than hdmi but otherwise it should work without issue Quote Link to comment Share on other sites More sharing options...
ejn1 Posted October 3, 2021 Author Share Posted October 3, 2021 2 hours ago, sonic30101 said: Toslink out is lower audio quality than hdmi but otherwise it should work without issue Thanks, was more worried about any C4 snafu's that can creep up that I'm not familiar with. Probably nothing to be concerned with you as you say. On Toslink, its a TV output but a side bar, I have always read that HDMI is the worst way to transmit high end digital audio due to high jitter (assuming bit rate / bit depth is not truncated). Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.