ERDrPC Posted December 13, 2021 Share Posted December 13, 2021 I have a doorbird announcement that triggers an audio and video snapshot. It was working prior to 2.10.6 to 3.2.3. Now only the Family room jump to IP camera works. I tried to setup conditional programing such that if the Office TV, Gym TV, and/or Rec room TV were on then show the IP camera on those as well. I have my NVR plugged into a JAP transmitter. I've tried using the if statement TV ON or Room ON but neither seems to trigger the programming. You can ignore the camera jump to the touchpanels - that works fine. I'm using my IP camera feed to the TVs instead of the camera jump for better resolution. FYI when the Doorbird Video time expires - it recalls the video snapshot. Only the family room displays the camera feed. None of the other rooms including masterbed (which doesn't have an IF conditional) don't change source if on or turn on to display the IP camera feed Quote Link to comment Share on other sites More sharing options...
ERDrPC Posted December 14, 2021 Author Share Posted December 14, 2021 Any ideas? I wrote a similar program under a different event to test and it works as expected. I disabled some of the code in the screen shot below but with nothing disabled - all TVs turned on and showed the IP camera. I'm stumped Quote Link to comment Share on other sites More sharing options...
ERDrPC Posted December 14, 2021 Author Share Posted December 14, 2021 I even tested the if Office TV on with nested watch command and it works. I'm really confused Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted December 15, 2021 Share Posted December 15, 2021 I assume that you can get the NVR to show using the watch command? I would suggest you try lengthening all of your delays somewhat as a start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.