anon2828 Posted January 22, 2022 Share Posted January 22, 2022 Is there any way to get a Concord 4 alarm panel not to beep when disarmed? Control4 makes it possible to "Silent Arm" where there is no confirmation beep, but when disarming it sounds a beep. If anyone knows the Concord 4 panel menus and commands to turn off the beeps, please let me know. TIA! Quote Link to comment Share on other sites More sharing options...
DawnGordon Posted January 22, 2022 Share Posted January 22, 2022 You can do a quick alarm by pushing #4. But don't do this on the way out of the house. Quote Link to comment Share on other sites More sharing options...
anon2828 Posted January 23, 2022 Author Share Posted January 23, 2022 Really trying to figure out how to turn off beeps on at the Concord 4 panel so that when disarmed it does not make the confirmation chime that wakes everyone in the morning... Quote Link to comment Share on other sites More sharing options...
anon2828 Posted January 23, 2022 Author Share Posted January 23, 2022 Figured it out - for those interested: 1) Enter Programming Mode (8, Installer Code, 0, 0) 2) MODULES > BUS DEVICES 3) Select the correct device by ID (you may have more than 1 if you have multiple keypads or other Bus devices such as the Control4 serial bus interface - you'll know the keypads when you enter the submenus as they have more options) 4) STATUS BEEPS = OFF (pressing 1 and 2 turn ON or OFF) 5) KEY BEEPS = OFF (pressing 1 and 2 turn ON or OFF) 6) Exit Programming Mode Note: Will not take effect until you have exited programming mode. Now wife will not moan and groan when alarm is armed / disarmed and she is asleep... turls 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.