Monoram Posted January 29, 2022 Share Posted January 29, 2022 Hi, Can anyone help with the Lutron Homework’s (illumination driver) for C4. I’ve made the connection and shows online in composer. Then added 1 keypad driver and gave it the correct address with the format described in documentation on the driver I.e [1:5:1] for example. I want to add the lighting scenes to C4 (OS3.2) to replicate the Lutron. I created scene names in advanced lighting but there doesn’t seem to be a way to connect them to the keypad in connections so I tried just doing it in programming When light scene Office is invoked press button 1 on keypad for example. I know the C4 is talking to Lutron as I can see fb on debug from the network driver bit nothing on the KP. am I missing something? Any help much appreciated. Quote Link to comment Share on other sites More sharing options...
mujtaba.khokhar Posted January 29, 2022 Share Posted January 29, 2022 Did you address the keypad too? mate you able to control lutron loads from control4? also try when lighting scene is invoked press button 1 50 ms delay release button 1 thanks Muj Quote Link to comment Share on other sites More sharing options...
Monoram Posted February 4, 2022 Author Share Posted February 4, 2022 Thanks for the reply. I had control but no feedback. the issue was the addressing. In the homework’s programme address shows as [1:1:2:1:3] for example but the C4 needs to have [01:01:02:01:03] Quote Link to comment Share on other sites More sharing options...
chopedogg88 Posted February 4, 2022 Share Posted February 4, 2022 which driver do you use to integrate Homeworks Illumination? Can't find one in the database. Quote Link to comment Share on other sites More sharing options...
mujtaba.khokhar Posted February 10, 2022 Share Posted February 10, 2022 On 2/4/2022 at 11:58 PM, chopedogg88 said: which driver do you use to integrate Homeworks Illumination? Can't find one in the database. Ari, just use regular "Homeworks" driver not the Homeworks QS one Thanks Muj Quote Link to comment Share on other sites More sharing options...
avtexan Posted May 18, 2023 Share Posted May 18, 2023 I am using the Homework’s Illumination (P5) driver. All of the switched and dimming lighting loads are working fine and I can emulate HW keypad presses with C4 custom button pushes. My 2 issues are: 1) How do I get the LED state of the Homeworks keypads? It looks like you can assign it but not sure if you can get the current state of the LED. I have a mix of homework and Ra2 lighting. I need to know the status of the HW keypad Led to properly program the selection of the correct phantom button in Ra2 2) Is there a fan driver? The switch driver works but not as functional as the fan driver for Ra2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.