tonysss13 Posted December 3, 2022 Share Posted December 3, 2022 I have had 5 Lutron QS blinds on my system for a few years working fine. Last week We added 4 new roller blinds that run along our sliding doors to the back garden. They are connected to the same 10 way Lutron PSU unit as the other 5, and I cannot get C4 to communicate with them for some reason. They operate fine from the 10 slot smart panel override button. I have changed the integration ID's , just as I did before and programmed exactly the same If I telnet a Details all devices command to the QS standalone unit (QSE-CI-NWK-E) this is what I get ?DETAILS, ALL_DEVICES ~DETAILS,SN:0x0179eef4,INTEGRATIONID:QS Interface,FAMILY:CONTROL_INTERFACE(6),PRODUCT:QSE(1),CODE:8.60,BOOT:2.13,HW:1.0 ~DETAILS,SN:0x02354998,INTEGRATIONID:QS Smart Panel_,FAMILY:SHADES(3),PRODUCT:SHADE_PANEL(2),CODE:0.47,BOOT:2.6,HW:2.1 ~DETAILS,SN:0x03c34733,INTEGRATIONID:Guest Room 1_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34734,INTEGRATIONID:Jacks Room_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34735,INTEGRATIONID:Gabys Room_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34736,INTEGRATIONID:Guest Room 2_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34737,INTEGRATIONID:Master Bedroom_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x076c0162,INTEGRATIONID:Sliding Doors 1,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c0163,INTEGRATIONID:Sliding Doors 2,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c0164,INTEGRATIONID:Sliding Doors 3,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c016a,INTEGRATIONID:Sliding Doors 4,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 I note my previous naming scheme appears to have an underscore at the end for some reason, however duplicating that has not helped. Also unsure what the codes after ROLLER(1) refer to but they do not match and wonder if that has something to do with it? thanks in advance Quote Link to comment Share on other sites More sharing options...
tonysss13 Posted December 5, 2022 Author Share Posted December 5, 2022 Still haven't been able to rectify this. I am wondering if the C4 driver is not pulling the new info / blinds from the QS standalone unit. When I action "Discover Lutron QS Devices" there is no output on the Lua Tab. With debugging on i get this strMatch = nil Function: SendToNetwork(6001, ?ETHERNET,0): ReceivedFromNetwork(), idBinding = 6001, nPort = 23, strData = ~ETHERNET,0,192.168.1.250 Received IP address from Network Interface (keep alive) Function: SendToNetwork(6001, ?ETHERNET,0): ReceivedFromNetwork(), idBinding = 6001, nPort = 23, strData = ~ETHERNET,0,192.168.1.250 strMatch = nil Received IP address from Network Interface (keep alive) Function: ExecuteCommand(LUA_ACTION): ACTION Function: SendToNetwork(6001, ?ETHERNET,0): Quote Link to comment Share on other sites More sharing options...
Composer4hire Posted December 9, 2022 Share Posted December 9, 2022 On 12/3/2022 at 9:48 AM, tonysss13 said: I have had 5 Lutron QS blinds on my system for a few years working fine. Last week We added 4 new roller blinds that run along our sliding doors to the back garden. They are connected to the same 10 way Lutron PSU unit as the other 5, and I cannot get C4 to communicate with them for some reason. They operate fine from the 10 slot smart panel override button. I have changed the integration ID's , just as I did before and programmed exactly the same If I telnet a Details all devices command to the QS standalone unit (QSE-CI-NWK-E) this is what I get ?DETAILS, ALL_DEVICES ~DETAILS,SN:0x0179eef4,INTEGRATIONID:QS Interface,FAMILY:CONTROL_INTERFACE(6),PRODUCT:QSE(1),CODE:8.60,BOOT:2.13,HW:1.0 ~DETAILS,SN:0x02354998,INTEGRATIONID:QS Smart Panel_,FAMILY:SHADES(3),PRODUCT:SHADE_PANEL(2),CODE:0.47,BOOT:2.6,HW:2.1 ~DETAILS,SN:0x03c34733,INTEGRATIONID:Guest Room 1_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34734,INTEGRATIONID:Jacks Room_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34735,INTEGRATIONID:Gabys Room_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34736,INTEGRATIONID:Guest Room 2_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x03c34737,INTEGRATIONID:Master Bedroom_,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:2.35,BOOT:3.0,HW:11.6 ~DETAILS,SN:0x076c0162,INTEGRATIONID:Sliding Doors 1,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c0163,INTEGRATIONID:Sliding Doors 2,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c0164,INTEGRATIONID:Sliding Doors 3,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 ~DETAILS,SN:0x076c016a,INTEGRATIONID:Sliding Doors 4,FAMILY:SHADES(3),PRODUCT:ROLLER(1),CODE:3.7,BOOT:2.4,HW:83.14 I note my previous naming scheme appears to have an underscore at the end for some reason, however duplicating that has not helped. Also unsure what the codes after ROLLER(1) refer to but they do not match and wonder if that has something to do with it? thanks in advance Stupid question but did you activate the shades in qs? Quote Link to comment Share on other sites More sharing options...
tonysss13 Posted December 9, 2022 Author Share Posted December 9, 2022 Hi thanks for your response. Maybe not a stupid question, can you elaborate on how to do that? The blind company we're supposed to deal with all the Lutron end and I dealt with C4. This worked fine last time but perhaps they haven't activated them? Quote Link to comment Share on other sites More sharing options...
Janssens Posted December 10, 2022 Share Posted December 10, 2022 The Lutron dealer should be programming the blinds into the QS processor and then activating them to the processor. When that is done, the blinds will now each have their own integration ID, which Control4 can use to send and receive information to the QS processor to control/monitor the blind. If you're attempting to discover Lutron QS devices from Control4 and these new blinds don't show up, my suspicion is that the blinds did not get added to the QS processor. Get the Lutron dealer to confirm blind operation from their QS processor (even without Lutron controls, they can test/control the blind from their QS programming software). If you happen to be there when they do the test, ask them for the Integration Report from their software. The integration report includes all the integration IDs for the various devices that you can then plug into Control4. Quote Link to comment Share on other sites More sharing options...
tonysss13 Posted December 10, 2022 Author Share Posted December 10, 2022 Hi Janssens thanks for your reply. Forgive me I am not that well versed in Lutron programming The blinds are connected Via QS standalone interface, and I am able to see the blinds and also able to set their integration ID's via telnet. The blinds do operate from the 10 way Smart PSU so i know the operate ok, although they are not yet grouped which I cannot find a way to do so via telnet. I am able to set phantom buttons and trigger them from C4 to operate the new blinds. I am waiting for the blind companies Programmer to contact me to go through it again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.