mikenberg Posted January 15, 2010 Share Posted January 15, 2010 Does anyone know how to successfully map Uverse remote comamnds to C4? I have tried updating the macro to capture the IR codes from the Uverse remote but can't seem to get the box to respond to my IR flashes when I perform the task using the mapped buttons on the C4 remote.Any history or input anyone may have on getting Uverse integrated into my C4 system is greatly appreciated.Regards,Michael Link to comment Share on other sites More sharing options...
digitaltrader Posted January 17, 2010 Share Posted January 17, 2010 take a look here for some know issues with the uverse box: http://www.cepro.com/community/viewthread/281/ Link to comment Share on other sites More sharing options...
Sbutter Posted January 19, 2010 Share Posted January 19, 2010 I have succesfully controlled a Uverse box with C4. You should try using emitter shields and non-blinking IR emitters. Link to comment Share on other sites More sharing options...
jroza1 Posted August 17, 2010 Share Posted August 17, 2010 I just finished adding the uverse box to my system. I did not program the remote, I just used the out of the box driver for the Motorola box that AT&T uses. To ensure a tight fit and shielding, I prefer a little black tape :-p over the sensor. The only button I noticed is missing is the "back" button so when you are browsing dvr or on demand, you need to start over each time, which is a little annoying. I have not decided on which button to reprogram... Maybe the recall ? Link to comment Share on other sites More sharing options...
blackfiveo1 Posted February 16, 2017 Share Posted February 16, 2017 Super necro bump but does anyone have trouble with the RECALL not working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.