ILoveControl Posted January 9 Share Posted January 9 Hi All, I have a few Nyce sensors eventually got around to play with the NCZ-3011 (Window/door - contact switch) using the driver: Name: HA Profile Contact Switch Device File: DoorWindow_zb_nyce_3011.c4i On the device properties its behaving as you would assume - it shows sensor open and closed if you open and close it ..... Where I need help is if I go to programming there is no programming options for when its open and closed all it shows is Events: Back Online Battery Low Offline Warning Trouble I would of expected it to have Sensor status of some sort so I can program when the contact is open or closed? Or does one have to then bind it to a normal relay or contact driver and use that instead for programming? Would appreciate the help. Quote Link to comment Share on other sites More sharing options...
Baubas Cat Posted January 9 Share Posted January 9 1 hour ago, ILoveControl said: Or does one have to then bind it to a normal relay or contact driver and use that instead for programming? This is the way. ILoveControl 1 Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 9 Share Posted January 9 there is a c4z version of the driver i believe, you want to use that version... ILoveControl 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.