Tim Posted July 19, 2011 Share Posted July 19, 2011 Okay, here is bizarre one that I need help with. We have an ethernet TP v2 running director 1.7.36. It was using a static ip. We recently have restaked the static ips and have reissued a new ip to the TP. Once the new IP was entered, we had a power blurp. Now the TP does not show the network access icon under info. We have reflashed the unit with a USB to reset it and that did not work. We have removed the unit from the wall and have directly connected it to the POE switch to verify there are no cableing issues. We get POE power fine and we get an IO blinking light from the network. Any thoughs? Link to comment Share on other sites More sharing options...
ILoveC4 Posted July 19, 2011 Share Posted July 19, 2011 Try again tomorrow. I've had similar issues with the old 10.5's that resolved themselves after waiting a little bit. I assume this is a 10.5? Link to comment Share on other sites More sharing options...
Tim Posted July 19, 2011 Author Share Posted July 19, 2011 It is a 3 1/2 color mini touch. Link to comment Share on other sites More sharing options...
Tim Posted July 19, 2011 Author Share Posted July 19, 2011 Regretably time was not the cure. The problem still exists. Any other thoughts? Link to comment Share on other sites More sharing options...
thecodeman Posted July 19, 2011 Share Posted July 19, 2011 probably time for a compact flash card replacement/reflash. Link to comment Share on other sites More sharing options...
Tim Posted July 19, 2011 Author Share Posted July 19, 2011 On a 3 1/2 inch ethernet touch screen? It is not a 10.5 panel. Link to comment Share on other sites More sharing options...
Tim Posted July 20, 2011 Author Share Posted July 20, 2011 Any other thoughts? Is there a way to go to a factory reset and reflash to 1.7.4? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.