mowat360 Posted September 27, 2011 Share Posted September 27, 2011 Hey forum....any help is much appriciated. I have a HC 200 controller on a small project. the power LED is solid Blue but the wifi LED is solid RED.I have powercycled the controller but it turns back on with the same thing. Power LED = Solid BlueWifi LED = Solid REDEthernet on the back have green and orange led that shows communication but this controller is not coming online.Anybody there for rescue? Link to comment Share on other sites More sharing options...
alanchow Posted September 27, 2011 Share Posted September 27, 2011 From memory it means that either the image is corrupt and is not loading or the boot loader has failed. Image corrupt is fixable with a system restore. Boot loader failing is bad. If it is under warranty return to supplier. Link to comment Share on other sites More sharing options...
mowat360 Posted September 27, 2011 Author Share Posted September 27, 2011 Thanks Alan!I tried factory restore but as soon as i power up........controllers both led's light upPower = Blue Wifi = Redand nothig happens after that.I guess i'll get the controller RMA. Controller is 1 week new.Thanks again Link to comment Share on other sites More sharing options...
thecodeman Posted September 27, 2011 Share Posted September 27, 2011 Be sure you have it on a ups. Link to comment Share on other sites More sharing options...
Matt Posted September 27, 2011 Share Posted September 27, 2011 Do you have anything plugged into the USB ports? Link to comment Share on other sites More sharing options...
mowat360 Posted September 29, 2011 Author Share Posted September 29, 2011 Nothing is plugged into usb port. I had a word with C4 tech support, ran through certain diagnose (Like: 6 time power cycle etc.) and finally got this controller RMA'ed.Thanks to all who responded. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.