cybuch

I have a XR-65A95K and would like to control it via RS232. 

I have static IPs for the DTV and nothing else on the network has a conflict. It only affect DTV, nothing else.  I will call TS tomorrow and see what they can find.  I will report back. 

I added a Halo to my system a month ago and it works great (except the delay when it sits for a bit and you press a button).  I have an issue with DTV and IP control, it works great with DTV on IP control, but randomly it will stop controlling DTV and I have to reboot my controller to get it to work again.  Anyone else have this issue?

I have tried the X1 IR driver and it seems to work well on the DVR but on the client box is has issues when you hit the right arrow more than 3 times, it opens a dialog box for no reason. Any help is greatly appreciated!

On 8/31/2023 at 4:04 PM, SpencerT said:

Dude.

Ad-free subscription is literally less than $.03 a day. 

Or "stick it to the man" and run an ad blocker.

Or just deal with the ads?

I'm not judging.

I just don't understand coming to a forum, from which you have clearly received value, to bitch about ads, while not bothering to hit the easy button.

Hope you figure out a good solve. 

thanks bro

Every time I click on a topic, I get a full page ad.  Ok, here is what I figured out....if you don't visit for a little bit, you get your fair share of ads you missed.

It was the same issues I had before.  If you hit the right pad really fast it would open the search box.  I ended up editing the V1 driver and remove the repeat count on the IR commands, that solved it for me.  And same issue as you, only affected the small remote boxes. 

Thank you!

Is it just me, or are there a ton of new ads on the site?

I tried the xfintiy driver and it has some issues, I am hoping someone made an IR driver?

yea, the NEEO is a huge POS.  Charges, doesn't turn on.  Doesn't charge, doesn't turn on.  Turns on, works for weeks, back to not charging.  POS

23 hours ago, Amr said:

Turn on SMB1 so C4 can “See” it!

Maybe that's the problem.  I enabled SMB but it doesn't say SMB1.  I didi disable SMB2. 

Has anyone had a luck getting the Buffalo Terastation working with the C4 my music DLNA driver?  I can seem to get it working correctly. I enabled the DLNA server per the instructions on buffalo's website.  I can access the DLNA information from other devices, but C4 just doesn't find it.

On 11/14/2022 at 11:19 PM, Amr said:

OS2 large local DB is prone to corruptions, better delete the DB that is eating ram from controller and use DLNA driver instead.

I think that is my issue!  I am moving to DLNA

Go to programming, and on the right side, go to variables.  Select the first variable, then under the conditional tab select the 2nd option, then find the second variable.

Does anyone know if there are limitations to the My Music list?  I have a customer with several thousand albums on his NAS and he can't scroll past a few screen without his TS resetting back to the Home Screen,  Even if he hits the "T" he gets the spinning wheel of death for a while before the TS goes back to the Home Screen.  Any thoughts?

On 10/21/2022 at 11:56 AM, eggzlot said:

We did that locally, scrap wire and put an extra tstat right in the room basically dangling off the Tstat.  seemed to work fine.  then he tested the wire with some handheld device and got some beeps, thought there may be interface, found where there was a splice in some wires and said he changed things to avoid interference as it was near some metal.  it is happening again though

again I tend to believe it is not c4 related, but its hard for an HVAC tech to know that, so I am just trying to dismiss it.

It is also hard because it can go 20 minutes stable then become unstable for 10 seconds or 30 seconds, then normal for 1 minute or 10 minutes, then back to unstable.  It is not just a simple its always working or always not working when using the remote sensor.  So yes we tried a local sensor on a new wire, but we also didn't sit there for 30 minutes.

I had the exact same problem with 3 V1 tstats, remote sensors worked fine for years, then all of a sudden temp would jump around.  I tried everything, even powering the V1 from a separate power supply.  I did end up fixing it, I replaced all 3 V1s with V2s and used the exact same sensors and wiring, no problems since.

I have the same issue.  I just hit channel one 15 times to reboot it and it connects, but what a pain

Never mind, I see C4 is having AWS issues

Like the title says, I can t seem to login.

OVRC, no thanks!

I am looking for a new outdoor PTZ with tracking that works well in low light and tracks correctly.  I have looked at luma, but don't know how good it works, with only 2k image.  Input?

2 hours ago, grant0830 said:

Crazy question, we have a JVC projector using the Control4 SSPD driver. While watching something on the projector (say roku) and we want to change to another device say Apple TV pushing “watch” button on the SR260 while something is playing will turn off the projector. However, if I click watch in the iOS app it will NOT turn the projector off? 
 

any ideas why the SR260 would cause this to happen but not the iOS app

Try a reboot fo the controller, I had a similar issue with the ATV driver.

Reboot of the controller fixed it.

Tried the sync and it didn't fix it, trying a reboot of the controller now