AHA

How do you download these drivers? There are no links on berto.co.uk

Thanks

Its a Control4 glass faceplate.

Panasonic doesn't support universal mini drivers, devices which do are listed in the driver docs. Your pretty much limited to listing the Panasonic App menu under the watch menu. Selecting that will open the smart hub on the tv, from there you can select youtube etc.

F = 2018

G = 2019

If the TV supports SDDP there’s usually a driver. Do you have Control4 SDDP options in your network menu? Try using the GX driver. 

Pretty sure 25 is lower due to FCC which is only in the US. 

It was removed. Go into the settings of the iPad it’s self and change the auto lock to never. 

In Display and Brightness of the iPad set auto lock time to never and set guided access to mirror your settings.

If you’ve got a section of the touch screen that is not responding to touch, even when it’s not connected to a system, then there is a hardware issue with the actual touch screen in the screen. 

The section is usually horizontal and goes all the way across the screen. Seen it before, including one of my own. 

The known issue with more than 6 screens is to do with intercom calls. 

Sounds like you’ve got hardware issues. 

Your dealer will need to do this or if you have Composer HE you can do it.

Click on the room in composer, go to the Navigator tab, select shades, modify.

26 minutes ago, Thepritch88 said:

Is there a way to have multiple systems saved on the new app? Like in the old app you could choose from a list of systems you’ve connected to 

On the app go to settings and press the + icon top right to add another system.

13 minutes ago, Gary Leeds UK said:

 

The Image from the CCTV - Doorstation comes on no problem - Goes to our Hikvsion Camera 1080 and it will not show - Say resolution is too high.

We have HC800 Running Director and couple of EA1 and we was thinking of upgrading the HC800 for EA5 so we could get the Camera pop up on the screen when the Sensors

are triggered,

Are dealer can not get a answer out of C4

The answer is no it does not support 1080.

The EA controllers display cameras at a maximum of 720. The EA controllers can only perform software decoding of H.264 so they are limited to 720.

42 minutes ago, Gary Leeds UK said:

 Anyone about 720p Image Question on EA controllers ?

Can they do 1080 or are they stuck at 720 ?

My dealer can not get any answers from the Control Rep 

What image are you talking about?

The HDMI video output is up to 1080p

33 minutes ago, Matt Lowe said:

might be able to download an android emulator and use the android app. not sure if they exist for mac.

Download Bluestacks. Works great!

USB won’t do anything. All you need is the Device Image Updater software from the dealer portal to down grade it. 

Seen it before and all you can do is replace the screen. 

Try something else like mute or a direction button and see if it responds.

Thats because i typed it wrong. Managed to read it from two line

HDMI 1: $be $ef $10 $00 $05 $3a $3e $11 $11 $01 $00 $50
HDMI 2: $be $ef $10 $00 $05 $23 $be $11 $11 $01 $00 $72
HDMI 3: $be $ef $10 $00 $05 $e3 $7f $11 $11 $01 $00 $73

From those examples you should be easily able to work out the others from the doc.

Read each line from left to right and where you have two hex codes together read them from right to left. So 0xffcc put this in the driver as $cc $ff 

You could create a basic serial driver in less than 30 minutes in the driver wizard of composer. All the codes are listed in the doc.

Power on: $be $ef $10 $05 $00 $c6 $ff $11 $11 $01 $00 $01
Power off: $be $ef $10 $05 $00 $0c $3e $11 $11 $01 $00 $18
HDMI 1: $be $ef $10 $05 $00 $e3 $7f $11 $11 $01 $00 $73

PM’d

You can't use the Texecom connect module with the Connect app and Control4 at the same time. You will need a separate ComIP or RS232 connection for control4 for it to work reliably. 

Each Comip or Connect module only allows one connection at a time.

I'd say its nearly ready as I have a working version at the moment. The driver will auto update.

...t/internal/c4z/driverworks_sky_channels/JSON4Lua.lua:380: Unexpected character at Line 1 character 1: F (70) when reading object ({ or [ or ' or " or number or boolean or null expected) Context: Failed to get http://tv.sky.com ^

Similar/same error here too.

If you keep watching the log you should see it try to download the data and fail.

I have that problem too, Alan's going to troubleshoot on my system when he's next available. 

Turn on debug and look in lua, you'll probably see an error when you try loading the channels from a nav.

Count me in if you need another tester