gadgetfreak

where is that setting? why would it create lag? ermote version 1.71.3-30626811

I keep thinking it will get better with an update, but over a year now my Neeo remote controlling the appletv, or my receiverr volume or my nvidia has about a 1-2 second delay on every press. As you can imagine it's frustrating as hell to navigate things. The only thing that helps is rebotting the control4 unit, but that lasts maybe a day or so and it slows down again. I have a unifi network, and older threads said that might be it, but the network is fast and no lag on anything else on the network. any help?

so to be clear, on the access point closest to the neeo, you created a ssid just for that one? and that one only? I already have a IoT seperate 2.4ghz only ssid that it connects to . I don't think from that spot in the room it can "see" the ssid broadcast from another AP. Or is it because there's other devices on the SSID? you only have 1 client the neeo on 1 ssid to that 1 AP? any specific setting like VHT20 vs VHT40, signal strenght what about "allow BSS transmission" here are my settings.

Is this confirmed ? I have unifi dream machine pro and unifi access points.seperate 2.4ghz ssid and the neeo continuosly drops is there a way to not let the neeo wifi go to sleep?

I have a lumagen radiance pro video processor and a BenQ LK990 projector. One of things I really want to do is figure out if the picture is putting out an HDR image, and if it is, to switch the picture setting on the projector. the other is to get the volume indications from the receiver and overlay it on the screen. these posts explain it but both require a C4 installer who can figure this out. Has anyone done this? I have an Arcam 390 receiver. all devices input into the lumagen, lumagen video out goes to projector, audio out via hdmi goes to my receiver. https://www.avsforum.com/threads/new-lumagen-radiance-pro-series.2172017/post-58867404 https://www.avsforum.com/threads/new-lumagen-radiance-pro-series.2172017/post-59045304

wow! who is your integrator? I've had control4 for 8yrs never knew this is possible. I have a steam shower, how does it connect? I have a mr. steam. would love to also connect to my jacuzzi that's wifi connected, marquis. is that possible? your rules seem pretty amazing. the door tied to lighting, what sensors are you using to trigger that?

I can't get a hold of my control4 installer since covid. I upgraded my network to ubiquiti unifi network UDM Pro, not sure it's related but happened the same week. I have a few questions hopefully you all can help. is it possible to pay someone here to login and help? I have a HC800 in the rack, Arcam 390 receiver (connected RS232), and a EA1 v2 connected at the projector via rs232. Last year I pulled out my 8 sonos amps and instead got the Triad 8x8 amp, which i'm so disappointed I could not use google voice. I do regret it now. So a few questions. I kind of have some google voice setup on my system but i'm on OS2. I thought only OS3 had some google voice commands available? Can I keep my HC800? Or do I have to upgrade? At this point most of my house is smartthings with google home controlling most things. Control4 controls all my lights, 4 skylights, 3 somfy shades, and my home theater which consists of a BenQ projector, Arcam receiver, Lumagen radiance pro, Oppo bluray, Nvidia Shield, AppleTV, Nintendo Switch. Nvidia shield is my main video player. Just want to be able to use google to turn on the projector, receiver, lumagen, set the right input, and ability to change projector picture settings with either voice or some hard buttons near where i sit. Right now, i got ahead of myself, launched composer 2.10.5 and deleted my roku i stopped using, but realized that also deleted the whole set of triggers that turned on my projector, receiver etc. I don't know if it's my unifi, but the EA1 stopped controlling the projector. attached is the EA1, is the "enable null modem" supposed to be checked or not? there's a rs232 connected to the projector via a ethernet cable with a dongle on each side. so right now the kids can't turn on the theater without me. i need to get the lumagen on the control4 via rs232 along with the Nvidia (IP based or IR?). Would love to be able to edit all the scenes myself (some I can, others I can't on the control4 website) as some are listed as the installer only. I really want to use google voice for most things around the house and relegate the control4 more as the brains of the system. I don't think I need to upgrade the remote? or is the Neeo worth $600? Main things for home theater is turn everything on, switch inputs on receiver and lumagen, and have a button to switch to HDR, cinema or bright setting on projector. I got it ISF calibrated and those are the 3 picture settings, bright does have the lumagen switch to a custom mode as well. hope all this makes sense. maybe control4 might be done the way i imagined it would be 8yrs ago when i purchased it. so far it's been fairly a disappointment but I think if i can change scenes myself and use voice it finally will be something my wife likes and kids can use.

could you please help me? been trying to figure this out for weeks