pfissure

hi everyone, i have a DS2 mini and in its web-based configuration utility there is an option for day/night mode. you can set it to Always Day, Always Night, or automatic. when i set it to automatic the DS2 never switches to Day mode. and that means that during the day its effectively a black-and-white camera. if instead i set it to always Day then i get color during the day but pitch black at night. so my qeustion is. first, is it possible to schedule the switch from day to night so as to over-ride the automatic? if not, what can i do to make the DS2 more sensitive to daylight so that it switches to Day mode when i have it on automatic?

Hi, this sequence of errors is appearing in director.log every 5 minutes. Does anyone recognize it? I have not been looking at the logs recently but I believe this is new after having upgraded to 2.10.5 2019-01-21 10:14:02.224 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: Flash: Failed to retreive device info from 192.168.1.8 2019-01-21 10:14:04.325 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: Flash: Failed to retreive device info from 192.168.1.79 2019-01-21 10:14:06.427 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: Flash: Failed to retreive device info from 192.168.1.35 2019-01-21 10:14:08.729 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: Flash: Failed to retreive device info from 192.168.1.31 2019-01-21 10:14:10.902 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: Flash: Failed to retreive device info from 192.168.1.29 2019-01-21 10:14:11.003 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied 2019-01-21 10:14:13.109 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied 2019-01-21 10:14:15.222 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied 2019-01-21 10:14:17.324 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied 2019-01-21 10:14:19.425 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied 2019-01-21 10:14:21.527 -0600 home-controller-800-000FFF58EFF5 [4730] ERROR: handleSendTo(): Error writing to connection: Permission denied

i would assume that one could develop an iphone app that uses the built in touchid to verify your identity and then sends an IFTT or text message or otherwise interfaces with the rest of the world and this could be used to trigger events in C4 based on touchid. right?

Hello, We have just installed a house full of Hunter Douglas Powerview blinds with Gen 2 hubs. Our dealer is coming in a week to integrate into our C4 (on 2.10) system. As usual it would be nice to know in advance what is going to be done and how it works. I was hoping the community could help clarify a few things. 1. Does the C4 driver talk to the PowerView hub? Does it have access to scenes that are programmed into the hub? When new shades/scenes are added to the hub will the driver see them (without having the dealer get involved again)? 2. In composer HE can I program actions like activating scenes, moving shades? 3. Is there feedback from the shades/hub to the C4 driver? In particular will C4 tell me the current position of the shades? Thank you and any other advice you can give would be very helpful.