robbie3130

I believe it’s on the room itself on the left hand side in programming. Colors show up in the drop down list (for selected?)

Sold

23 minutes ago, Cyknight said:

This is so much fun right??

 

Isn't there new plugin free firmware for the Luma NVRs?

Just now, ejn1 said:

cant integrate that into C4

Fair point - they are pretty much the only thing I have that isn't. House has cat6 wired to camera locations, ended up going Nest for the functionality, hard to beat IMO

Haven't not been able to talk a delivery person into leaving it on the step yet!

24 minutes ago, ejn1 said:

Response time is an issue with my Doorbird.  I haven't seen a brand yet actually trigger the app fast enough for you to being able to talk to the person at the door before they leave.   Please let us know if response time allows for this and i will get on the purchase list also for one!

Nest

Really wish the T4's had smaller bezels, and perhaps a built in temp sensor (and if not possible due to display heat, a connector for an external temp sensor), but hey - then they can't sell an outdated thermostat to go along with it

13 taps to reset it and then try

Not sure if you have the original outlet dimmer or not, but the new outlet dimmers and switches that are part of the essentials line are a vast improvement.

Still sort of bulky though.

https://www.control4.com/docs/product/plug-in-outlet-dimmer/data-sheet/english/revision/B/plug-in-outlet-dimmer-data-sheet-rev-b.pdf

You can get a Qolsys IQ Panel 2+ with a PowerG daughterboard. The DSC PowerG motions/sensors look good (maybe they all have PowerG support, and the daughterboard choices are for legacy/other devices..unsure)

History on Alarm screen is broken too 

Still works on non-updated apps/T3's

On 9/10/2020 at 3:08 PM, koxkp said:

When is C4’s cedia update?

I'm wondering the same thing, I searched and can't find it. Seems to be lumped in with Snap maybe.. Savant/Crestron/etc certainly have a heavy presence 

FWIW I have a 520 and don't have this issue...IP control and driver version 10402 (receiver fw version 0.9.5)

I do have the default volume set under the room > Miscellaneous settings.

1 hour ago, ILoveC4 said:

Mine are Somfy and if they’re not perfectly in sync they’re pretty damn close. Close enough that I can’t tell.


Sent from my iPhone using Tapatalk

Setting up scenes in Hunter Douglas and then adding them in on the C4 side works damn near perfectly too...

Should add - Graber has models with Somfy motors, sure those would work too.

Hunter Douglas has Everwood and Parkland with Powerview.

On 8/14/2020 at 8:55 AM, ejn1 said:

I think the main issue with Lutron is color selection in Serena and if you want like a silhouette like option.    In the Serena line they are good value if you can live with a non louvered shade and their limited colors.   If you have to step up in their line unfortunately Hunter Douglas become much better value, imho.  If its monopoly money to you, then go all the way Lutron, they are great!

+1

Was surprised that HD w/ Powerview came in considerably less than Lutron's in my situation. Did the whole house in one shot and must say I'm completely satisfied.

https://drivers.control4.com/solr/drivers/browse?&q=&fq=manufacturer:"Qolsys"

It doesn't appear to be needed for C4 integration, but in my case I just have the lowest tier of alarm.com which has the monitoring bundled with it. (at least with my provider)

You don't need the automation addon from alarm.com for the C4 integration - sales person insisted when I was signing up, but it's not needed.

The app is ok, but I'm generally using C4 over 4sight to manage arm status.

Proximity disarm via bluetooth from phones is handy.

I have the exact Qolsys setup, with PowerG daughter board and DSC PowerG sensors. 

Works great, make sure the Qolsys is on latest firmware (or at least minimum recommended in C4 driver documentation) and it works flawlessly. Super easy setup.

Edit:

Minimum 2.4.0 on the Qolsys panel

If Alarm company doesn't provide dealer code, be sure to get the secure access token from the technician in:

: Settings --> Advanced Settings --> Installation --> Devices --> Wi-Fi Devices 

Keep the token to provide to C4 dealer to configure driver.

I recently added Hunter Douglas PowerView shades. At least from the dealers around me, they were significantly less expensive than Lutron..which was surprising to me. I find they generally work flawlessly. Can't comment on wired vs non.. as I added mine after the house was built.

FWIW (I know - not what you're looking for) I have the new essential series plug in Outlets and they work perfectly over Zigbee.. huge improvement over the old ones (LED dimming wise, etc)

I wouldn’t be surprised if converting from fiber to copper would be more latent than a straight copper connection tbh

Had to manually reboot mine as well - only fav icon showing was the security system for whatever reason.

I find the LG WOL can be problematic. It does work, I have a couple LG's and a couple Sony's. Sony stays connected to network even when powered off, offer OLED options as well. If I could go back in time I'd buy Sony for all of them.

My 2 cents anyway.

Here is the old driver.. it didn't add scheduled events to the Nest schedule, but it for sure changed the set points "manually" via C4 when each was triggered. I had it across three Nest thermostats.