JJ7 Posted April 19, 2020 Share Posted April 19, 2020 In my theater room I have a JVC projector and an LG TV and I'm using the Theater Display Switcher to switch between them. This mainly works fine with the following exception. Say I've been using the projector and I shut the room off. If the next time I use the room I switch to the TV, it (the TV) fails to turn on. However from watching the status light on the TV I know It received some command. So either it didn't get power on for some reason, or it got power on and immediate off, or something else? The usual way I work around this issue is to select some other source (as opposed to the last source used) and then the TV turns on. I would very much like to resolve this issue as otherwise the theater display switcher works fine. Quote Link to comment Share on other sites More sharing options...
willybald Posted June 26, 2020 Share Posted June 26, 2020 Hello I also have problems with the driver, after connecting the video endpoint the OnScreen device does not work anymore. you have the same problem Quote Link to comment Share on other sites More sharing options...
JJ7 Posted June 27, 2020 Author Share Posted June 27, 2020 The driver is working fine for me except if I do the following: use the projector turn off the system select the TV and turn on the system I have to select the source device a second time before the TV will turn on Quote Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted June 27, 2020 Share Posted June 27, 2020 Have you played around with-Control or Monitor to see if that helps ? Quote Link to comment Share on other sites More sharing options...
JJ7 Posted June 28, 2020 Author Share Posted June 28, 2020 20 hours ago, Gary Leeds UK said: Have you played around with-Control or Monitor to see if that helps ? Not yet, I'll try it this week and report back if it helps. Quote Link to comment Share on other sites More sharing options...
JJ7 Posted June 30, 2020 Author Share Posted June 30, 2020 On 6/27/2020 at 4:10 AM, Gary Leeds UK said: Have you played around with-Control or Monitor to see if that helps ? As far as I can tell those only apply if C4 is controlling a motorized screen. I do have such a screen, but it's triggered directly by my projector (DC trigger). So I don't believe those settings would do anything in my case. But I'm still new to C4 so let me know if I got that wrong... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.