Jump to content
C4 Forums | Control4

Exercise room with Bluetooth headphones


Recommended Posts


Done lots, but either you need a matrix switch with a free output OR hdmi to the TV.

From a C4 standpoint you'd create a second room if you want to continue to use speakers as an option and call it something along the lines of "Exercise - Headset", bind whatever feeds the headphones as the audio and volume end-points and bind the same TV as the video endpoint.

Link to comment
Share on other sites

For clients I've to date provided Sennheiser units primarily (RS-220 or MM 500-X) but these are ... pricey.

We've done some of the more basic Sennheisers as well and have one client (a company fitness room!) that is very happy using the JayBird Sportsband one each for each piece of equipment plus some general use "floor" ones (that's 16 - a full C4 Matrix worth of them :cool:)

When using a bluetooth set we've used both the Motorola (DC800 - believe this is the one used in the mentioned fitness room, yes 16 of them) and Sony (HWS-BTA2W) Bluetooth transmitters without issues.

Those two would however allow you to connect whatever bluetooth set you like to them - true headphones, or your earpiece.

Do note that using a bluetooth adapter like these can throw off the synch ever so slightly. I doubt most would ever notice it unless the speakers are on at the same time however. If you want wireless headphones for movie/tv enjoyment without bothering others, spend a bit on a good RF transmitter/headphone set vs a more universal device like those bluetooth transmitters.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.