Ara Posted December 15, 2014 Share Posted December 15, 2014 does any one know if the hard drive can just be changed to a larger capacity or does it contain the OS on it? any suggestions will be helpful thank you Link to comment Share on other sites More sharing options...
bsalvador Posted January 23, 2015 Share Posted January 23, 2015 It contains some sensitive info about the OS.Before any changes, clone the HD. Link to comment Share on other sites More sharing options...
alanchow Posted January 23, 2015 Share Posted January 23, 2015 The os is not contained on the hard drive but on a DOM. Link to comment Share on other sites More sharing options...
RyanE Posted January 23, 2015 Share Posted January 23, 2015 Where DOM == Disk On Module. It's a small circuit board at the front of the HC1000, with some Flash chips on it. RyanE Link to comment Share on other sites More sharing options...
bsalvador Posted January 24, 2015 Share Posted January 24, 2015 You can access the DOM by just plugin it in a USB internal motherboard port on any computer, it will appear as a USB drive. In the HDD there are some kind of serial number hidden in a partition, that the Control4 OS will check before start. So if you change the HD by a blank one, the director wont boot.Unless you patch it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.