Wolfaslov Posted March 12, 2016 Share Posted March 12, 2016 First post (noob). Just got my EA3 installed and also C4-16Amp3-b. 6 audio zones in my home. When it was first installed, I could easily enable multiple zones in the house. Worked with shairbridge, and tune-in radio. All of a sudden, I can only have one zone playing at a time. When I try to turn other zones on, they are no longer listed as being able to be turned on. Rebooted EA3 and the amp with no luck. Any my thoughts that could help me out before I call my dealer? Link to comment Share on other sites More sharing options...
Cyknight Posted March 12, 2016 Share Posted March 12, 2016 Hmm. Ea3 only has one stereo audio output (though there are ways to get more streams via the digital coax and hdmi). Is your problem that you can only listen to one STREAM at a time (but still that one stream in more than one location), or are you not even seeing the option to do that? Link to comment Share on other sites More sharing options...
Wolfaslov Posted March 12, 2016 Author Share Posted March 12, 2016 As far as I know, I can only listen to one stream at a time with just the EA3. Correct me if I'm wrong. But the problem is that that particular stream is only able to be heard in one zone at a time. There used to be an option to add more audio zones so I could have all 6 zones in my house playing the same stream at the same time. Now when I choose to add more zones, there aren't any listed. Hope that makes sense. Link to comment Share on other sites More sharing options...
9800pro Posted March 12, 2016 Share Posted March 12, 2016 So when you are listening in "zone 1" and press zones button (house icon) and then add zones there is no zones to add? And can you start listening to music in any zone or just in one? If its only one is that one conected to C4 amp or something else like AVR or something? Sent from my LG G2 Link to comment Share on other sites More sharing options...
Cyknight Posted March 12, 2016 Share Posted March 12, 2016 Correct, there would be only one stream - but wanted to make sure you're aware of that. Other than that: 9800pro's questions are the next step. Link to comment Share on other sites More sharing options...
Wolfaslov Posted March 12, 2016 Author Share Posted March 12, 2016 Thanks for your responses. To answer 9800pro, 1. Yes. 2. I can start listening in any zone. But while in any current zone, I am unable to add other zones by clicking on the "house" button. They simply aren't listed. 3. It is only connected to C4 amp. Link to comment Share on other sites More sharing options...
Cyknight Posted March 12, 2016 Share Posted March 12, 2016 One last one - when you press 'zones' - does it show the session in play (in other words it DOES show the one room is playing and you can press 'add rooms' but it simply gives an empty list). OK maybe two - what device(s) are you trying to do this from. Link to comment Share on other sites More sharing options...
Wolfaslov Posted March 12, 2016 Author Share Posted March 12, 2016 1. That is 100% correct. 2. iPad and/or iPhone. Also trying from the 250 remote. Link to comment Share on other sites More sharing options...
Cyknight Posted March 12, 2016 Share Posted March 12, 2016 Right. That's a weird one. I wonder if when the change was made a refresh navigator was forced - not sure if you have HE, or if not if ME allows you to trigger that yourself but that's one thing to try. If that doesn't fix it I wonder if something odd is going on with the room bindings. Link to comment Share on other sites More sharing options...
Wolfaslov Posted March 12, 2016 Author Share Posted March 12, 2016 Ok. It sounds like this is over my head. I'll have to ask my dealer. Thanks for your input. Link to comment Share on other sites More sharing options...
9800pro Posted March 12, 2016 Share Posted March 12, 2016 Yup, this a weird one. Without looking at project with composer pro i don't have a clue. Your dealer should help you out here. Sent from my LG G2 Link to comment Share on other sites More sharing options...
Audio Obsessions Posted March 13, 2016 Share Posted March 13, 2016 Is there an HDMI output from the ea3 bound to anything with an audio endpoint route? It could be choosing that route? Long shot, but worth checking, either way this would take someone looking in on composer. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Wolfaslov Posted April 15, 2016 Author Share Posted April 15, 2016 So...if i have a room playing, then I switch rooms on my iphone app, then I hit that zone to play that same source, it works fine....Then I can go into the icon that shows the 2 zones that are now playing.......that's the only way that I can get multi-zone playing. Had the dealer "remote-in" to system and they couldn't figure it out. They are coming out next week for a different reason so I'll get them to fix er up and tell you the solution they found. Link to comment Share on other sites More sharing options...
gcjacob Posted February 18, 2017 Share Posted February 18, 2017 On 4/15/2016 at 3:01 PM, Wolfaslov said: So...if i have a room playing, then I switch rooms on my iphone app, then I hit that zone to play that same source, it works fine....Then I can go into the icon that shows the 2 zones that are now playing.......that's the only way that I can get multi-zone playing. Had the dealer "remote-in" to system and they couldn't figure it out. They are coming out next week for a different reason so I'll get them to fix er up and tell you the solution they found. Same problem here. Did u manage to solve this? How? Thanks Link to comment Share on other sites More sharing options...
Wolfaslov Posted February 18, 2017 Author Share Posted February 18, 2017 I'm sorry to say that I don't know how they solved it but it's solved. It was annoying as hell tho Link to comment Share on other sites More sharing options...
funnyfarm299 Posted February 19, 2017 Share Posted February 19, 2017 1 hour ago, gcjacob said: Same problem here. Did u manage to solve this? How? Thanks What system software version are you running? Link to comment Share on other sites More sharing options...
VINCELdUB Posted February 19, 2017 Share Posted February 19, 2017 Was a bug in a previous software. There is a control4 patch that is released and also it is solved by upgrading to 2.9.1 KB#1806 Happy Automating! Link to comment Share on other sites More sharing options...
gcjacob Posted February 19, 2017 Share Posted February 19, 2017 I have my system updates tô 2.9.1 and i still have this problem. Any hints on how to solve it? Link to comment Share on other sites More sharing options...
ekohn00 Posted December 18, 2018 Share Posted December 18, 2018 @gcjacobdo you still have this problem? How did you resolve? I have the same problem for some time now. thanks. Link to comment Share on other sites More sharing options...
ronlonnborg Posted December 19, 2018 Share Posted December 19, 2018 Sound like it lost its rooms in composer or the audio end-points. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.