kevind222 Posted April 17, 2016 Share Posted April 17, 2016 Hi. I programmed my C4 EA1 and it won't load the navigator on my tv. Any ideas would be greatly appreciated. Link to comment Share on other sites More sharing options...
Soundinstaller Posted April 17, 2016 Share Posted April 17, 2016 Not a lot of information from you, but the first thing I would check is the bindings. Do you have the controller's HDMI output bound to the correct input of your AV receiver (or TV)? Link to comment Share on other sites More sharing options...
kevind222 Posted April 17, 2016 Author Share Posted April 17, 2016 If I reboot controller it loads "control 4"on screen and glitches out and goes blank. Link to comment Share on other sites More sharing options...
msgreenf Posted April 17, 2016 Share Posted April 17, 2016 is ntsc or pal properly specified? Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
thegreatheed Posted April 17, 2016 Share Posted April 17, 2016 If the project is not set up correctly, the screen will always go blank. Default setting is a blank screensaver. Link to comment Share on other sites More sharing options...
kevind222 Posted April 18, 2016 Author Share Posted April 18, 2016 Ok thanks guys. When I hit "4" button it accesses hdmi 3. But screen is blank. Anyone points me in a direction. Link to comment Share on other sites More sharing options...
StroTek LLC Posted April 18, 2016 Share Posted April 18, 2016 I would suggest you go complete the dealer training on control4's site Link to comment Share on other sites More sharing options...
msgreenf Posted April 18, 2016 Share Posted April 18, 2016 sounds like you don't have the room level binding set to use that EA1 as navigator Link to comment Share on other sites More sharing options...
kevind222 Posted April 18, 2016 Author Share Posted April 18, 2016 Thanks a lot. Link to comment Share on other sites More sharing options...
control.four Posted April 19, 2016 Share Posted April 19, 2016 Ok thanks guys. When I hit "4" button it accesses hdmi 3. But screen is blank. Anyone points me in a direction. Are u a dealer? If this is the level of knowledge required please sign me up also. Link to comment Share on other sites More sharing options...
kevind222 Posted April 19, 2016 Author Share Posted April 19, 2016 No. Just trying to learn. Thought this a place to ask questions. Leave your sarcastic comments else where mate. Link to comment Share on other sites More sharing options...
msgreenf Posted April 19, 2016 Share Posted April 19, 2016 If you aren't a dealer you shouldn't have composer pro Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
StroTek LLC Posted April 19, 2016 Share Posted April 19, 2016 composer pro is restricted to dealers only.. even if you somehow found yourself a copy that works.. you still need dealer level training to get everything setup and, not trying to be mean here but, you do NOT have dealer level training on control4. I would suggest you contact some of the dealers on here that do remote programming and setup.. and have them setup your controller for you.. and then learn from what they have done Link to comment Share on other sites More sharing options...
kevind222 Posted April 19, 2016 Author Share Posted April 19, 2016 Ok thanks. I don't have composer pro. My engineer had it working when it was set up. I went too access through navigator other day and it wouldn't load didn't know if there was a simple solution. I will refrain from asking questions from now and just browse on here. Thanks again guys. Link to comment Share on other sites More sharing options...
StroTek LLC Posted April 19, 2016 Share Posted April 19, 2016 By all means ask questions.. we do want to help.. but we are weary of people who are breaking control4's license agreements etc contact the dealer that set it up for you in the beginning and have him fix the issue.. and feel free to post on here what the problem was.. that way the next person who has the issue can just search Link to comment Share on other sites More sharing options...
kevind222 Posted April 19, 2016 Author Share Posted April 19, 2016 Ok many thanks. Will do. Link to comment Share on other sites More sharing options...
Question
kevind222
Hi. I programmed my C4 EA1 and it won't load the navigator on my tv.
Any ideas would be greatly appreciated.
Link to comment
Share on other sites
15 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.