Dave w Posted July 30, 2016 Share Posted July 30, 2016 Did anybody know of a good Dahiua driver? I have the following equipment, and have been trying to use the IC Realtime drivers but so far 2 different C4 integrators have failed to get them working. No matter what encoding settings I try I can only get 1 cam installed and then only get a very snowy barely visible video stream. If I add more than one cam the NVR freezes up. NVR = Dahua NVR4208-8P 2 X Dahua IPC-HDBW4300E 3 Megapixel 1080P Dome IR Network IP Vandal Proof Security Camera 4 X Dahua IPC-HFW4300S 3MP Bullet Camera NVR Firmware is up to date: 3.200.0000.8 R 2015-04-28 Camera Firmware is also up to date: 2.420 on all Oddly IC Realtime iOS apps work fine for accessing the NVR. Quote Link to comment Share on other sites More sharing options...
createauto Posted August 1, 2016 Share Posted August 1, 2016 Have you tried using camera drivers rather than the NVR driver. We've installed several Dahua systems this year with Control4 and had little success with the NVR drivers. So connected all cameras to the network switch rather than directly to the back of the NVR and works a treat ?? Quote Link to comment Share on other sites More sharing options...
Dave w Posted August 2, 2016 Author Share Posted August 2, 2016 Thanks. No I have not. What are you using for recording if you are not using the NVR and plugging into a switch? And are the IP cams n the primary network or spun off on a subnet? I'd hate all that traffic on my main network... Quote Link to comment Share on other sites More sharing options...
createauto Posted August 2, 2016 Share Posted August 2, 2016 All cameras on the same network as the NVR. Bandwidth not really an issue on a gigabit network..... Quote Link to comment Share on other sites More sharing options...
Gix656 Posted August 3, 2016 Share Posted August 3, 2016 What driver are you using for the Dahua cameras? Quote Link to comment Share on other sites More sharing options...
createauto Posted August 3, 2016 Share Posted August 3, 2016 GenIV driver from HouseLogix Quote Link to comment Share on other sites More sharing options...
Dave w Posted August 20, 2016 Author Share Posted August 20, 2016 Houselogix seems to have pulled this driver down. Any idea why. I have a copy but still have exact same issues I described in original post with IC realtime drivers. Quote Link to comment Share on other sites More sharing options...
AP-123 Posted December 23, 2016 Share Posted December 23, 2016 Just ordered a Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z). Does anyone know a driver that will work and how to get it? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted December 23, 2016 Share Posted December 23, 2016 Please look at my Amcrest driver, after looking at the API documentation, they are the same camera and my Amcrest driver should work AP-123 and cdepaola 2 Quote Link to comment Share on other sites More sharing options...
AP-123 Posted December 27, 2016 Share Posted December 27, 2016 On 12/23/2016 at 7:55 AM, msgreenf said: Please look at my Amcrest driver, after looking at the API documentation, they are the same camera and my Amcrest driver should work Thank you! Quote Link to comment Share on other sites More sharing options...
SeanAV Posted August 16, 2020 Share Posted August 16, 2020 On 12/23/2016 at 8:55 AM, msgreenf said: Please look at my Amcrest driver, after looking at the API documentation, they are the same camera and my Amcrest driver should work where can I find this driver.. looking to integrate some Honeywell cameras Quote Link to comment Share on other sites More sharing options...
Hasnat Posted August 17, 2020 Share Posted August 17, 2020 i have been worked with amcrest driver. that was good. msgreenf 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.