TheOracle Posted December 29, 2008 Share Posted December 29, 2008 Since my dealer performed the 1.6 upgrade, I've been having a problem with all my dimmer switches. In programming mode when I have the light turned on to 100%, it will be at probably a 60% level. I can walk over to the dimmer switch and push the top button and it will ramp up to the full 100% level. Has anyone seen this? If so, how did you get around it? Is there a way to reset all the dimmer switches in the house?Thanks in advance.Jimmy Link to comment Share on other sites More sharing options...
neil12011 Posted December 30, 2008 Share Posted December 30, 2008 this i fixed in 1.7 Link to comment Share on other sites More sharing options...
TheOracle Posted December 30, 2008 Author Share Posted December 30, 2008 OK. Thanks. I guess I have to have the dealer come out to do that as well. Link to comment Share on other sites More sharing options...
Matt Posted December 30, 2008 Share Posted December 30, 2008 Have you dealer make sure all zigbee devices are on the correct version. Link to comment Share on other sites More sharing options...
Brad_The_Lucky Posted December 30, 2008 Share Posted December 30, 2008 Have you dealer make sure all zigbee devices are on the correct version.I thought all the zigbee devices like dimmers just updated their firmware automatically if needed - presumably based on whatever the HC was running?? Does the dealer have to 'force' an upgrade on them? Link to comment Share on other sites More sharing options...
RyanE Posted December 30, 2008 Share Posted December 30, 2008 They *should* automatically update, but if the Zigbee update file didn't get properly installed during the 1.6 update, it's possible they're not updating.RyanE Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.