Shivam Paw Posted October 2, 2017 Share Posted October 2, 2017 Hi, We have our advanced light scenes set up. Our light panels are from Mode Lighting but the problem we have is that the the buttons are not switching to the active LED when the scene is active. My scene configuration is: The inactive LED shows when the scene isn't active but the green doesn't work automatically. I have had to program it manually so that when that scene turns to active button X on each of the keypads which control it have a green LED. This is very time consuming considering we have so many keypads and lighting scenes. Surely there has to be a proper way to do this? Thanks Link to comment Share on other sites More sharing options...
sonic30101 Posted October 2, 2017 Share Posted October 2, 2017 Are these native dimmers, sounds lkike they are not being tracked properly Link to comment Share on other sites More sharing options...
Shivam Paw Posted October 2, 2017 Author Share Posted October 2, 2017 5 minutes ago, sonic30101 said: Are these native dimmers, sounds lkike they are not being tracked properly No. We are using Mode Lighting as that was what was already used previously. http://modelighting.com/ http://www.modelighting.com/products/edin/control-plates/evo-plates/ http://www.modelighting.com/products/edin/ Link to comment Share on other sites More sharing options...
Shivam Paw Posted October 2, 2017 Author Share Posted October 2, 2017 I should add that when a scene is active it does show as active in HE under current state. Link to comment Share on other sites More sharing options...
dcovach Posted October 2, 2017 Share Posted October 2, 2017 I don't know anything about "mode lighting" but I'm pretty sure you will only be able to track led status (on C4 keypads) of advanced lighting scenes with 3rd gen control4 keypads (or converted switches/dimmers to 2 button keypads) via a "connection" between the light scene and the keypad (dealer only) . No programming necessary. Otherwise, led behavior has to be custom programmed to work even on the gen 1 and 2 C4 lighting with advanced lighting scene led tracking. Am I wrong on this or can advanced lighting scenes be " connected" to mode lighting products? Link to comment Share on other sites More sharing options...
Shivam Paw Posted October 3, 2017 Author Share Posted October 3, 2017 Thanks. Can anyone confirm this? And is there any way around it? Link to comment Share on other sites More sharing options...
zaphod Posted October 12, 2017 Share Posted October 12, 2017 On 10/3/2017 at 2:08 AM, Shivam Paw said: Thanks. Can anyone confirm this? And is there any way around it? The way around it is to buy C4 lighting. Link to comment Share on other sites More sharing options...
sonic30101 Posted October 12, 2017 Share Posted October 12, 2017 or make a variable for each scene, when it is initiated set the status in the variable and based on the variables value. Update the LEDs accordingly. The fault in this method is that you dont get status when the scene is de-activated and all the added steps. I had to do this with my GE zwave dimmers but can live with it since they were stupid cheap Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.