kb4321 Posted February 17, 2018 Share Posted February 17, 2018 Hi everyone, Ok I've had this situation for quite a while now, and for some reason it's bugging me more these days than in the past. I have programmed a floor status button on both levels of the home on a keypad, so I am able to see if a light or device is on and when leaving the house/go to bed, and I can hit the one button and the entire floor shuts off. I have a Sharp Roku TV in the master bedroom. Now at night the TV is off, but in the morning let's say I've got the ensuite lights on, the hallway lights etc. So when I go to leave, I hit the button to shut off the floor. But when the TV is off, and I hit the floor status button to shut lights off, the TV turns on. I've tried many work arounds for programming and can't seem to make it work where if TV is off, do not execute the macro on the TV. Can anyone give me any input on how to avoid this? Link to comment Share on other sites More sharing options...
sonic30101 Posted February 17, 2018 Share Posted February 17, 2018 I have never worked with those tvs. Are you turning the tv off in your macro or the room? Link to comment Share on other sites More sharing options...
mallom Posted February 17, 2018 Share Posted February 17, 2018 Are you sending a TV power toggle command or a “room off” command? Link to comment Share on other sites More sharing options...
ZenElectronics Posted February 17, 2018 Share Posted February 17, 2018 Have you tried "if room power is on" then "turn room off" instead of trying to just power cycle the TV? I would be happy to login to your system and take a look. No charge. Just shoot me a PM if interested. Thanks, Joe Z. Link to comment Share on other sites More sharing options...
kb4321 Posted February 17, 2018 Author Share Posted February 17, 2018 16 minutes ago, mallom said: Are you sending a TV power toggle command or a “room off” command? Both basically. I have: Turn off Master Bedroom Turn off Master TV Link to comment Share on other sites More sharing options...
kb4321 Posted February 17, 2018 Author Share Posted February 17, 2018 22 minutes ago, sonic30101 said: I have never worked with those tvs. Are you turning the tv off in your macro or the room? In the macro Link to comment Share on other sites More sharing options...
sonic30101 Posted February 17, 2018 Share Posted February 17, 2018 Just try turn off the room in your macro because if the tv/room is off nothing should happen, if it is on and the tv is on it will turn off the tv. Manually turning the tv off when the driver Isis power toggle is exactly your problem. Any time you are manually turning a device on or off programmatically c4 does not know the status of it since the power state when set up correctly is managed at the driver level Link to comment Share on other sites More sharing options...
sonic30101 Posted February 17, 2018 Share Posted February 17, 2018 4 minutes ago, kb4321 said: Both basically. I have: Turn off Master Bedroom Turn off Master TV Remove turn off master tv and see what happens Link to comment Share on other sites More sharing options...
mallom Posted February 17, 2018 Share Posted February 17, 2018 Both basically. I have: Turn off Master Bedroom Turn off Master TVSo I guess your TV does not have discrete “OFF”.Also, you dont need to use both. I would use “Turn off room” instead of the TV. Link to comment Share on other sites More sharing options...
kb4321 Posted February 17, 2018 Author Share Posted February 17, 2018 1 minute ago, mallom said: So I guess your TV does not have discrete “OFF”. Also, you dont need to use both. I would use “Turn off room” instead of the TV. I think that's what the problem would be... because the other two tv's don't have the same issue, just this Roku TV Link to comment Share on other sites More sharing options...
mallom Posted February 17, 2018 Share Posted February 17, 2018 I think that's what the problem would be... because the other two tv's don't have the same issue, just this Roku TVWhat is the exact model of your TV? Link to comment Share on other sites More sharing options...
kb4321 Posted February 17, 2018 Author Share Posted February 17, 2018 2 minutes ago, mallom said: What is the exact model of your TV? Model is LC-43LB371C Link to comment Share on other sites More sharing options...
kb4321 Posted February 17, 2018 Author Share Posted February 17, 2018 7 minutes ago, mallom said: So I guess your TV does not have discrete “OFF”. Also, you dont need to use both. I would use “Turn off room” instead of the TV. 8 minutes ago, sonic30101 said: Remove turn off master tv and see what happens You both are awesome! I cannot believe it was that easy after all this time. That did the trick. Thank you. Link to comment Share on other sites More sharing options...
mallom Posted February 17, 2018 Share Posted February 17, 2018 4 minutes ago, kb4321 said: You both are awesome! I cannot believe it was that easy after all this time. That did the trick. Thank you. Great! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.