What do you want to integrate exactly?
1) are you trying to control the NVR via control4 (NVR HDMI out going to the TV and control the menus of the NVR)
2) Or view the camera feeds on mobile phones/C4 GUI?
For number 1 you need:
a) C4 customer firmware (seems you already have it)
b) add the NVR driver to the project
c) Add the correct IP and credentials (I think it can be done via sddp as well)
For number 2 you need a camera driver. I use the Generic Camera Driver. There is a post somewhere on this forum where you can get it from. (thats how I do it. Im sure there are better ways to accomplish this, but this works fine for me. The C4 Hikvision camera driver doesnt give me the correct URL stream for some reason)
a) Download the Generic Camera Driver
b) Assign the correct IP and Port for each camera. I have the same NVR and for me, this is how I get the streaming URL for each camera:
NVR's IP: 111.222.333.444
If using POE:
Camera1 would be: 111.222.333.444:65001
Camera2 would be: 111.222.333.444:65002
Camera3 would be: 111.222.333.444:65003
and etc..
Now you just have to assign the streaming URL. If you have Hikvision cameras, it should look something like this:
RSTP: Streaming/Channels/X0Y
- "X" corresponds the NVR channel
- "Y" corresponds to the main or sub stream.
So, if you want to grab the sub stream of channel number 1, the URL would look something like this:
- Streaming/Channels/102
So, if you want to grab the main stream of channel number 5, the URL would look something like this:
- Streaming/Channels/501
MJPEG: Streaming/channels/2/httppreview
Snapshot: Streaming/channels/2/picture
Good luck!