ILoveC4 Posted October 15, 2019 Share Posted October 15, 2019 I'm an idiot when it comes to 4K. I've got an Integra 5.3 receiver and an Epson 6050 PJ. I want to get 4K from the receiver to the PJ. I have a bunch of CAT6 ran between the 2, and they're about 90 feet apart. What do you recommend? Is this any good? https://www.amazon.com/AV-Access-Extender-HDBaseT-4K60Hz/dp/B073QL6YT3/ref=sr_1_3?keywords=4K+18gbps+HDMI+balun&qid=1571100713&sr=8-3 Time2Jet 1 Quote Link to comment Share on other sites More sharing options...
Time2Jet Posted October 15, 2019 Share Posted October 15, 2019 Just my .02 @ILoveC4I love AVPro Edge products. I’m known to toot their horn. They aren’t cheap. But they simply just work every time ...right out of the box. They support every conceivable current audio and video protocol and most importantly ...they last. They extend audio/video/ir/PoE and Ethernet. I use the AC-EX100-444-KIT v2’s at home. The problem with the generic & quasi-generic (Amazon/eBay) extenders is that they claim to do it all, but just don’t last and you don’t get the extension they proclaim. On the other side, brands like Atlona and Gefen are certainty great quality, but IMO AVPro Edge products work better and last longer. I’ve never replaced one since I started using them as “AVPro Connect” brand back in 2013. I have 2 in my current home project and 6 in my offices. Over the years I probably have had a dozen. Not one has ever failed. Also, support is available and awesome. These guys are very techy. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
OceanDad Posted October 15, 2019 Share Posted October 15, 2019 42 minutes ago, ILoveC4 said: I'm an idiot when it comes to 4K. I've got an Integra 5.3 receiver and an Epson 6050 PJ. I want to get 4K from the receiver to the PJ. I have a bunch of CAT6 ran between the 2, and they're about 90 feet apart. What do you recommend? Is this any good? https://www.amazon.com/AV-Access-Extender-HDBaseT-4K60Hz/dp/B073QL6YT3/ref=sr_1_3?keywords=4K+18gbps+HDMI+balun&qid=1571100713&sr=8-3 I use exactly this AV Access piece to run 4K from a receiver to an outdoor TV on my roof deck. Tx is in an outdoor equipment closet, and the Rx is mounted in a panel within the TV. It's been rock solid for the last 2 years, which is more than I can say for some C4 equipment. Time2Jet 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.