Dueport Posted December 15, 2020 Share Posted December 15, 2020 At long last my C4 system is installed! My integrator was able to get many (not all yet) of my devices into the project. They were able to get the Honeywell Vista panel integrated using the CBM module. I can arm and disarm and see when zones are opened BUT I can’t take those zones and program off of them. I thought this was possible (ie programming off a motion sensor to turn on lights) but when I go into programming on Composer HE I don’t see any actions related to the zones to use in programming (only state of the system or panel). Also the zones only live in the zones tab under my security system in the navigator - we can’t break those out and put them into rooms under sensors (ie in the navigator put the foyer motion in the foyer room under security and sensors). Does my integrator need to enable something else to allow both programming off of zones, and also breaking the sensors into other parts of the navigator? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted December 15, 2020 Share Posted December 15, 2020 They never finished your setup and never added the driver for each zone. That is what you need to program against Quote Link to comment Share on other sites More sharing options...
Dueport Posted December 15, 2020 Author Share Posted December 15, 2020 3 hours ago, msgreenf said: They never finished your setup and never added the driver for each zone. That is what you need to program against @msgreenfThank you Mitch! I thought there must have been another few steps - I'll raise that with them. Appreciate your help! Quote Link to comment Share on other sites More sharing options...
Topfox Posted August 5, 2023 Share Posted August 5, 2023 @msgreenf Messing around with my system today it looks like Im in the same state. I have the 4232 driver that is working fine. I can arm, disarm, see all my zone states in the app and in history, but am unable to program it seems off those zones. Which drivers are supposed to be added additionally for the alarm to be able to program off the zone states. Didn't see any mention in the 4232 driver doc, and not seeing anything screaming at me when searching driver database. Quote Link to comment Share on other sites More sharing options...
Topfox Posted August 5, 2023 Share Posted August 5, 2023 3 minutes ago, Topfox said: @msgreenf Messing around with my system today it looks like Im in the same state. I have the 4232 driver that is working fine. I can arm, disarm, see all my zone states in the app and in history, but am unable to program it seems off those zones. Which drivers are supposed to be added additionally for the alarm to be able to program off the zone states. Didn't see any mention in the 4232 driver doc, and not seeing anything screaming at me when searching driver database. Nevermind, I think Ive got it now...I knew I would possibly figure it out right after I ask Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.