Jump to content
C4 Forums | Control4

Chowmain - AMP Motorization Shading Driver


alanchow

Recommended Posts

Chowmain Logo" data-fileid="0691T00000DU6KKQA1

Overview

The AMP Motorization Program brings the automatic power of motors to your window treatments, integrating AMP remote controls, APP, Google Assistant, Amazon Alexa and other home integration devices to create the perfect ambiance morning, noon and night.

AMP motorization has a comprehensive range of motors for a variety of motorized window coverings, including Roller Shades, Roman Shades, Honeycomb Shades, Cellular/Pleated Shades, Sheer Shadings, Revolve/Double Shades and Horizontal Tilt Blinds.

The system also includes a Wi-Fi bridge, which enables mobile app control and doubles as a bridge for integration with third party control systems like Control4 for bi-directional or uni directional control (depending on motor) with up / down / stop, position, tilt based control.

Features

  • Automatic import of shades for the correct featureset
  • Uni Directional Shade Driver
    • One Way Driver
    • Commands
      • Up
      • Down
      • Stop
    • Feedback
      • Shade MAC address
  • Bi Directional Shade Driver
    • Two Way Driver
    • Commands
      • Up
      • Down
      • Stop
      • Position
    • Feedback
      • Position
      • Battery mAh
      • Shade MAC address
  • Bi Directional Tilt Shade Driver
    • Two Way Driver
    • Commands
      • Up
      • Down
      • Stop
      • Position
      • Tilt
    • Feedback
      • Position
    • Tilt
      • Battery mAh
      • Shade MAC address
  • Bi Directional TDBU (Top Down, Bottom Up) Shade Driver
    • Two Way Driver
    • Commands
      • Top Motor
        • Up
        • Down
        • Stop
        • Position
    • Bottom Motor
      • Up
      • Down
      • Stop
      • Position
    • Feedback
      • Top Motor Position
      • Bottom Motor Position
      • Battery mAh
      • Shade MAC address
  • Battery mAh feedback for bi-directional motors with batteries installed.
  • Ability to specify low battery mAh
  • Event fire on low battery
  • Automatic email notifcation on low battery (requires 4sight)
  • Automatic push notification on low battery (requires 4sight)

 

FAQ

Where can i find out more information about AMP products?

You can find out more information about AMP via the link below

https://www.ampmotorization.com/

What is the AMP motor portfolio?

The AMP motorization portfolio is a comprehensive range of motors for a variety of motorized window coverings, including Roller Shades, Roman Shades, Honeycomb Shades, Cellular/Pleated Shades, Sheer Shadings, Revolve/Double Shades and Horizontal Tilt Blinds.

What does this work for?

This will work for all AMP motorization devices connected to a AMP Bridge.

How does the AMP Bridge communicate?

The bridge has Wi-Fi to communicate with mobile devices and internet routers. It also utilizes RF communication to send and receive messages to AMP motors.

Does this device provide two way control?

This driver will provide bi-directional control and feedback over blinds / curtains that have two-way feedback.  If the motor is uni directional only the driver will assume the last state sent is the current state.

How doe Uni Directional Drivers work?

Uni Directional Drivers have up, down and stop commands only.  There is no feedback on the driver.  Note uni directional motors are only supported by the Connector Bridge DD7002B model.

How does TDBU Drivers work?

TDBU drivers have two proxies associated.  One for the top and one for the bottom.  The top motor closes when it goes up and opens when it goes down.  The bottom motor does the opposite and closes when it goes down and opens when it goes up.

Also note that if the top motor goes below the bottom motor’s level it will force the bottom motor to move to the top motors desired level.  This happens in reverse when the bottom motor goes above the top motor’s level as well.

How does Tilt Drivers works?

The Tilt driver has two proxies associated.  One for the position and one for tilt.  Note that on some motors tilt is driven by a single motor and as such tilting the louver will cause the main position to shift slightly between 95-100%.  This is normal behavior

I want to try this driver out before buying it?

All Chowmain drivers for Control4 come with a 90 day trial. 

How do I find out more information about the driver?

Please see the links below for more information about the driver.

Driver Link

 amp_screenshot

Link to comment
Share on other sites


This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.