Kyle Coolabode Posted July 4, 2022 Share Posted July 4, 2022 I have a TV with a digital optical connected to the Triad One. The TV has no stereo output. I want the audio from the tv to go to the rest of the audio zones on a C4 Amp. Can I use the stereo out on the triad one to the input on the Amp? Is this the best possible way? Thanks! Quote Link to comment Share on other sites More sharing options...
mstafford388 Posted July 6, 2022 Share Posted July 6, 2022 Yes you can run audio from that output to an input on the amp. You can also send that audio over the network to a C4 controller but would introduce a delay in doing so. Kyle Coolabode 1 Quote Link to comment Share on other sites More sharing options...
Cyknight Posted July 6, 2022 Share Posted July 6, 2022 I'm actually not 100% sure it would in fact just pass it through - but certainly worth a shot. That said make sure the Triad is said to direct, not direct+stream (you'd know if it was set to stream only ) Quote Link to comment Share on other sites More sharing options...
smccray Posted July 12, 2022 Share Posted July 12, 2022 On 7/4/2022 at 11:54 AM, Kyle Coolabode said: I have a TV with a digital optical connected to the Triad One. The TV has no stereo output. I want the audio from the tv to go to the rest of the audio zones on a C4 Amp. Can I use the stereo out on the triad one to the input on the Amp? Is this the best possible way? Thanks! Might be easier to use a digital to analog converter, and double bind the RCAs into the Triad one and the other audio matrix. Get a converter box that powers with USB, then use the USB on the back of the Triad one to power to the converter box. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.