Landon P Posted July 19, 2022 Share Posted July 19, 2022 Can any tell me how/is it possible to link 2 triad audio matrix together and they all can use the same sources? The other piece of this is they will not be in the same room. I have cat 6 running between them. Thoughts? Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted September 12, 2022 Share Posted September 12, 2022 My best recommendation would be two controllers to handle music services. However video or other audio sources will be difficult. you could feed audio into the controller inputs but it will be delayed so syncing video will be hard. Otherwise you will need network based video distribution. Quote Link to comment Share on other sites More sharing options...
Cyknight Posted September 13, 2022 Share Posted September 13, 2022 Basically you can't just 'link' the two - you have to either feed one into the other (which has some severe limitations) or split any sources (and as per above, you'll want ot have a controller for 'regular' C4 music) which may be it's own issue to begin with. Hard to give any hard recommendations without know ing a bit more though. Is it: Main location with all sources and one audio matrix Secondary location with audio matrix, no sources. Or Both locations have sources and you want to make those available on both sides Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.