Tomáš Pospíchal Posted August 21, 2022 Share Posted August 21, 2022 Hello we really appreciate id there will be option for copy and paste items in composer. For example we will setup whole KNX thermostat for one room, and than we need to make exactly the same setup for another room and another and another..... Just simple copy and paste will save a lot off time.... Thank you. Quote Link to comment Share on other sites More sharing options...
RAV Posted August 22, 2022 Share Posted August 22, 2022 At your own risk! Let's say you have a bunch of programming related to a state change. If you copy it in composer, and paste into a word processor, you can then find and replace the Device IDs, copy and then paste back into composer to the new device's state change. For example: Bedroom Thermostat ID is 1900 (you can see ID in design) Bedroom Thermostat when above 75.... Bedroom Thermostat when below 65.... Bedroom Thermostat when in cool.... etc You want the same thing for Guest, Guest ID is 1910 Copy bedroom, paste into word processor, search for 1900 and replace with 1910, then copy and paste into Guest Guest Thermostat when above 75.... Guest Thermostat when below 65.... Guest Thermostat when in cool.... etc Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted August 26, 2022 Share Posted August 26, 2022 there is a feedback option in composer pro. This is the best place to give feedback for composer. Alot of the features that are developed are created using only that feedback. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.