home theater with Stereo bypass

[scrarfussi]

have a setup that  has a AV processor Marantz,   Sony Projector  Mark Levinson preamp and power amp with other amps for surround 

Bluesound node 2 n130  for Stereo listening  

Bluesound is on input one on the ML preamp and the Marantz is on input 2 on the ML pre and input 2 is Set to Vol bypass  on the Marantz 

When watch is pressed Marantz comes on and  everything works ( Still Trying to get it to Switch on the Levinson) Volume is controlled by the Marantz 

What i am trying to add is When i Press Listen would like the Marantz and projector to go off  and Bluesound comes on and Levinson switches to input 1 

and volume is controlled by the Levinson 

But cant seem to figure out the Bluesound Driver to detect the audio so can use that in Programming 

and how to enable the Levinson as Vol control 

Anybody ever done something like this 

 

[Cyknight]

This isn't 'programming' this is done via bindings in ComposerPro.

[Matt Lowe]

it may also be wise to create another room depending on what these bindings might look like. PM if you need help getting it setup correctly.

[scrarfussi]

On 4/11/2023 at 5:37 PM, Cyknight said:

This isn't 'programming' this is done via bindings in ComposerPro.

I have not used Composer pro 

would you be able to assist me with these bindings ?

[Cyknight]

1 hour ago, scrarfussi said:

would you be able to assist me with these bindings ?

@Matt Lowe above sure could.