OS3 Navigator Buttons

[J to the D]

I'm trying to see if there is a way to change the on screen navigator buttons. I have a gate which shows under security but it is a toggle instead of on or off and would prefer to leave it this way. But, I would like to change the button with the onscreen navigator to be open only and not a toggle. Control4 gets feedback from the gate but it doesn't register it as closed until it fully closes, however sometimes the gate needs to be opened again before it fully closes and the toggle button only says a close command because it sees it as open. I can do this with custom buttons but that adds extra clicks or I was thinking to create an experience button.

Does anyone know if there is a simple option I am missing?

[Matt Lowe]

This could be down with experience buttons with programming or with bindings.

[Matt Lowe]

you could also create a timer that only sends the command to open or close every predetermined amount of time.

[J to the D]

23 hours ago, Matt Lowe said:

This could be down with experience buttons with programming or with bindings.

I may give that a try. Is there a way to get the gate feedback on the experience button? Nice to be able to show an open gate when it’s open