LG RS-Q10ENXE IR Driver

[segarafi]

please help me on this find the proper IR driver or split air conditioner IR capturing software for control4

[Andrew luecke]

Maybe check with sensibo or tado if they support this model. Chowmain has drivers for both

[segarafi]

I was thinking because of I have plenty of Control4 Z210 zigbee devices so I can utilized using by IR

I just want to only turn On and turn off  that's all

[Cyknight]

https://drivercentral.io/platforms/control4-drivers/climate-fan-fireplace/generic-thermostat-control4-driver-chowmain/ should do it for you.

Capture device is simply a controller - but I can't say if for this driver you'll need the dealer to do this or not (could be done remotely)

[Cyknight]

LOL 6in1 video and anti virus protection

REALLY poor choice on 'anti virus protection' - first thought is computer viruses for most when hearing anti-virus these days, not to mention that technically speaking, they are stating they are protecting you against anything that might kill viruses

[Andrew luecke]

4 hours ago, segarafi said:

I was thinking because of I have plenty of Control4 Z210 zigbee devices so I can utilized using by IR

I just want to only turn On and turn off  that's all

The big issue with a lot of split systems I think, is that many of them don't really have an on command (Alan can correct me).

The On actually sets the HVAC state too, so, it will set it to whatever heat/temp/whatever you learnt at the same time and revert whatever it has been set at since then.

Whereas, Sensibo is actually 2 way, and can even get feedback. So, you can reliably manage the Split system.