Control via Composer HE

[GDolf]

I’m fairly new to Composer HE and have used it for some basic property changes as well as a couple programming items.    There are a few things I was hoping to change through HE.  Can you let me know if these items are accessible in HE?

1) Button settings for SR260 remote?  

2) Audio EQ for Triad Amp?

3) Motion sensors (currently configured to my security system).   I would like to use them to control lights.

 

[Matt Lowe]

1) lots of options to do this in programming.

2) can do it in Composer but more intuitively you can do it in the control4 app with the correct os versions.

3) depends if the security system is fully integrated and the proper drivers are there but you should be able to program based on the sensors themselves.

 

Can also check out our composer home training course as we go over all of these topics in good detail.  Can't quite recall if we have a specific video on the eq but i know that we have touched base on it in our videos. might be our next video idea now that i think of it.

https://www.patreon.com/waltstv

 

[GDolf]

Thanks Matt.   I’ll do a little digging based on your response.

[Andrew luecke]

Are you on a surface pro or Mac?

[GDolf]

Running Composer on a Lenovo PC.   I’m an Apple/Max house, but bought a dedicated PC for Composer vs using VMWare or Parallels

[GDolf]

I was able to find and adjust the EQ’s for the Triad.    I just needed to scroll down a bit to find the Output Config page.   What a differenece!

[GDolf]

I’m still struggling to find where the buttons on the SR260 are programmed.   My dealer setup several of them.   Thinking I should be able to see them and make changes in Composer HE.   Any pointers?   Thanks in advance

[BY96]

13 minutes ago, GDolf said:

I’m still struggling to find where the buttons on the SR260 are programmed.   My dealer setup several of them.   Thinking I should be able to see them and make changes in Composer HE.   Any pointers?   Thanks in advance

You select the Room, not the remote itself, in the Device Events section. Then you select "Commands" and use the dropdown menu to select the different buttons that are on the remote. It isn't intuitive, but think of the command as being for the room from any device, like the C4 app, not just the specific remote. However, some of the options on the list, like the three custom buttons, are unique to the SR260. 

 

[GDolf]

10 minutes ago, BY96 said:

You select the Room, not the remote itself, in the Device Events section. Then you select "Commands" and use the dropdown menu to select the different buttons that are on the remote. It isn't intuitive, but think of the command as being for the room from any device, like the C4 app, not just the specific remote. However, some of the options on the list, like the three custom buttons, are unique to the SR260. 

 

Found it!   You’re right….it was not intuitive.    Thanks for the pointer!

[Andrew luecke]

Sorry. I responded to the wrong thread