cidle323

Not a direct replacement but I used this one in link below before. Need to cut and solder the oem connector to the  replacement battery or replace the leads on the battery all together. 

https://www.aliexpress.com/item/32790618287.html?spm=a2g0o.order_list.order_list_main.5.21ef1802pNGBBm

Which size do you have? 7" or 10" 

Awesome, good to hear it is backup and running again!

5 hours ago, awcs33 said:

Thank you for your input. Does anyone know where I can get this 400SM IVE power supply please?

Sent from my SM-S901B using Tapatalk
 

https://shop.icepoweraudio.com/product/400sm/?attribute_pa_packaging-type=sample

Sound like another 400SM ICE Power supply failure to me.  Connections do not matter at this point if the dip switch on the Pamp8-100 is set; power mode is set to on. The fans should be running and the 1-8 Blue Led's for the channels should be on as well.

34 minutes ago, danvan said:

I have bought a couple of Samsung Frame TVs, which are both fixed to the wall via Samsung Auto-Rotation Wall mounts. These are great as we can keep the TVs in portrait for Art mode, and then rotate them to landscape when watching TV.

Annoyingly the only way of controlling these is to pair them up to an existing Samsung TV art remote (which I believe is bluetooth) and use the rotate button on that remote.

Does anyone know of a workaround so that I can get Control4 to control this? Is there a bluetooth sending "device" with a C4 driver available for it?

Thanks very much

 

https://www.samsung.com/uk/tv-accessories/auto-rotating-wall-mount-vg-arab43wmtxu/?gclid=Cj0KCQjwk6SwBhDPARIsAJ59Gwct6YIhBpQTvr_oiK-3ND41lqoZ5BdMVCFzWrHJQcxz6GF3iHw7rnIaAnkiEALw_wcB

 

I am using the Rotator Mount with another version Samsung Qled variant and the rotation control was added in a update last year. Control done via Programming;

Version 209

• Fixed DRIV-8134 (DRIV-8569): Serial control not functioning
• Fixed Color buttons with Network control
• Added Display Rotator Control device specific command

Factory reset: 9-4-9

Unidentify 13-4-13

https://www.axxind.com/smarthome/contact-sensor/

Indeed Happy and Safe Holidays to all.

PM sent, have T4 and T3 options on hand.

@Wrio

I just so happened to see you are online now.  Did you follow up and make good with the OP?

I have a spare, where are you located? Alternatively can order part number below;

https://www.mouser.ca/ProductDetail/Molex/39530-0004?qs=cJvWYcaovXzY3zXnMJaAzw%3D%3D

Press the power button and select restart then hold down the back button until it the "welcome to Halo" appears. 

Should see the the Control4 Snap/AV logo flash on/off a few times before that happens though

I have 1 White but do not recall which version it is

Give this a shot from this thread, Only ever came across 1 unit that never took a re-flash. Saved at least a dozen for locals in my area thus far this year.

Parallel with the LED light I assume you meant

Try a Lutron shunt; Lutron LUT-MLC or going back a while now a V1 ELV dimmer; C4-TDIM-1 

Yep, this is what it is intended for.   I still use the Rock Chip factory tool (1.64) version, going back a few years now

Thread from the other week:

3 hours ago, willybald said:

not even in the onscreen of the Core 1 ?

Confirming not on OSD

Also Axxess Industries; door/window sensor. Great option for  "inside a wood door and frame" installation.

Used this method for half dozen years now.... I find the easiest for Inwall is to load the T3 firmware in the Rockchip software. Next, hold down reset button beside the microphone while connecting the USB cable to the T3 inwall. Should start flashing.  Lastly, re-boot the touchscreen with Rockchip software turned off or closed for reflash to load.

PM sent

7 hours ago, womble123 said:

Do you have a link please?

Nice to see in stock, have not been for sometime. I was down to my last one;

https://icepoweraudio.com/buy/icematch/400sm/