cidle323
-
Posts
183 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by cidle323
-
-
-
On 4/2/2020 at 4:04 PM, ILoveC4 said:
On the NEEO, I need the ability to join an existing session. Why is this not here? Is it coming?
Sessions released in current update, likely see updates starting tomorrow (default setting Thursdays). I was waiting for Blinds to be added, was nice to finally see that!
1.34.3 (2020-04-08) Changes since last release:
Full Session UX support
Shades integration for Neeo Remote, similar to the SR-260 integration
Volume Pop-up only appears when you have discrete volume.
Volume Pop-up can be disabled through Composer
-
+ 1 for Sinope, second choice would be Nuheat Signature AC0055 (built in GFCI)
-
On 3/4/2020 at 10:27 AM, SMHarman said:
New outlet dimmer and switch are long overdue.
Essential even.
On 3/4/2020 at 1:08 PM, blub said:Still looks ugly AF.....
I just can't wrap my head around ahy Control4 doesn't start supporting Zigbee 3, so many great devices which can't be used.
Control4 using any Zigbee 3 device would certainly boost zigbee in general and that's needed as ZWave is doing much betterAgreed long overdue. Wish they had went with a in wall solution, even if a deeper electrical box was needed.
-
Agreed, looks like a cheaper lighting alternative:
Outlet dimmer, outlet switch.
AUX Keypad, FPD and switch
-
Feb 24th, just need bigger truck..
-
Disable Wifi sleep seemed to do the trick for mine. It would freeze up from time to time for a couple seconds.
-
-
6.3 is correct, I just mic a spare OEM power supply.
The aftermarket ones are loose but do work.
-
Thinking the same, need PC versions
-
-
10 hours ago, zaphod said:
How easy (or not) is it to retrofit the motors in blinds. I have three HD blinds in my MBR that were installed about 13 years ago. On one of them the motor died so the firm I bought it from took it and put in a new motor. The new motor is WAY faster than the old one and much quieter. These are only automated with IR and I only seem able to send move or stop commands, which means that you have to open all the way to close. Any options on making changes?
Blinds that are a few feet long are not very difficult to swap out motors; just need to match roll tubes with appropriate motor make, brackets and ring/pinion and drive gear( eg. Somfy tubes for somfy motors). Install blind material 100% squarely onto tube, Pop in assembled unit and done.
Large blind panels are a bit of a PITA; same process as above but need to counter sink 2-3 screws into each tube, securing the drive gear to it. Keeps the drive gear from possibly spinning.
For IR blinds; Matterlink multi X ( has 0-100 position slider) or Chowmain added a driver for another brand comes to mind for C4 integration.
* slick trick for condo/industrial applications: hang multiple blind panels off of one tube/ motor instead of multiple short ones*
-
16 hours ago, ILoveC4 said:
There is a Control4 driver written for Somfy MyLink, which as I understand is basically a little box that communicates with the shades over their RF protocol and everything else via WiFi - so a gateway of sorts. I bought 2 of the MyLink units, but when they came and installed them they realized the MyLink units weren’t there. So for now I have a Somfy remote, but he will bring over the MyLink units soon - hopefully today or tomorrow. For now, they’re not integrated with C4 yet.
Good to hear you pretty much got the blind project done, looks great!
Just a thought since not integrated into C4 yet; Check out the domo somfy driver if you need more control of the blinds besides up, down and favorite positions. The domo driver has a pretty slick 0-100 slider (sure other similar drivers available now too)
-
39 minutes ago, BuffaloC4 said:
My remote has been on cradle for 14+ hours with no firmware update. Is there any way to force fw?
If you have Composer HE, check the Component Auto Update Event and the Component Forced Auto Update event in; Agents - scheduler and that it is set to daily.
Mine was defaulted to Weekly and had to wait nearly a week for the previous Neeo update.
-
Haha, Matte Black is the new Black!
-
On 1/13/2020 at 10:46 AM, BuffaloC4 said:
Would love to see a pic of the volume feedback! Can’t wait to get home from work!
-
-
Looks interesting, have yet to confirm drivers but a cheap alternative compared to a Somfy RTS hub and or even the C4 Zwave dongle.
The Flex Cloud Cloner (FCC) can learn 433MHz radio frequency codes, allowing Control4 systems to natively control devices
https://www.soundandvision.com/content/flex-automation-bridges-control4-and-z-wave
-
Agree with the Denon/Marantz lineup, rock solid setup every time. Just stay away from the budget S-Series lineup
https://usa.denon.com/us/product/hometheater/receivers
-
One button items require 9 button presses to reset
-
On 11/16/2019 at 5:16 AM, LollerAgent said:
I have the Chowmain TP-Link driver. I would like to use one of the TP-Link plugs on my Christmas tree. Is it possible to use an experience button (or something else) that shows a picture of a Christmas tree to turn the plug on and off? I would then just "favorite" it to a room. If so, any ideas where I might find a Christmas tree icon/experience button that could be used?
Is this what you are looking for?
- Gary Leeds UK and ERDrPC
- 2
-
-
-
HC-800 and EA5 terminal blocks
in Question & Answer
Posted
Confirming that they work in both, are the same.