Olichops

Sounds great but don't want to snoop the app to build a driver. Anything out there now as far as drivers that work with heat n Glo?

I asked about that on my build a year ago. Did not have one. Is the Wifi module thru Heat n Glo and who does the driver?

Anyone come up with a driver for the Heat&Glo fireplaces? I know that it will require a IR signal send so it could come off an EA device.

So I have several TP-link Kasa 103 switch wireless outlets for holiday lights. I tried to group them all in Composer as a holiday lighting group so the Lighting control on the touch screen only shows one holiday light instead of several. None of the lights respond as a group. The driver works fine with C4 switches so I figured they are not compatible.  Is there a work around to this?  

So how do you get drivers off Drivercentral if you don't have the official Dealer BS credents? Here's my money, can I have the driver please

The new dimmers look much smaller than the old ones and probably much better. TP link at $7 a pop can't be beat so I am going to try that route to see if it fills a simple need

So the TP Link is the Kasa line correct? How does the Kasa interface with control4 as they are on the Wifi? Native drivers in control4 or do I need to buy the driver for Control4?

So I have the C4 dimmer and not impressed with the size, reliability and price of the unit. I just want some reliable units for holiday lights. What are the forum recommendations to accomplish this and is the driver available?

Well, after re reading this post, just ignore the documentation directions about the driver is not bound if it is "valid IP" in the Driver Info line. Damn thing works anyway. Glad the instructions are wrong or not updated in the stupid driver! On to the next project!

Yep, I was looking for 2 way control so that Spa Controllers could activate lights on control 4 by unused aux ports of the Intellitouch

Lighting group in the intellicenter, you mean the outdoor control box or the intellitouch LCD panel which I don’t have. I do have the ScreenLogic adapter which I set the relay to a light but that does not pull tru to the C4 adapter to the C4 Touchscreens

That is because it reinstalls the same driver that is stored locally on the controller. Not sure where you got the "Brandt" version

Yes, it finally paired after multiple resets. Funny, it never upgraded to a newer firmware that it was originally stuck on and still 03.19.49 but works so that is all that matters!

I did that by SDDP and it ends up installing a SnapAV Driver

yep, I see that now, different drivers. Source of yours to try?

There are basically 2 online versions, the older one on 6/30/2016 requires the IP input in the driver itself. The newer on 8/7/2019 inserts itself into the Network list where you usually bind the IP via SDDP or IP. I can only use IP and that does not work either. LUA output of first driver as below:

Authorization: Basic cmpkb3ZpYWs6a2*****
User-Agent:APP
09/27/20 21:41:22 : Processing result
No Content or Headers

So looks like you have a different driver version. What is the build date on that?

I have this setup also and have experienced the same issues as others above. I wish there was the ability to access the Aux relays in C4 so it could be scheduled in C4 as part of the lighting control!

AK1,  your driver was created by chris brant but all online wattbox drivers that don't work are by SnapAV

It does not have to be SDDP, just not given the option to do it that way as it is list as and IP port on the network list. I did put the IP in manually and still it did not bind

SO having the same issue with the wattbox driver not binding with the 300-ip model. The older driver version with manual IP input in the driver is a no go and the newer version with SDDp connection will only allow a IP bind. SDDP drag and drop not allowed. AK1, where did you find your driver that works as I don't see it on the driver list!

So is the C4 Outlet dimmer Model LOZ-5D1 compatible with the iOS 3 on the EA-5? I am able to identify the module when I pair it but it always gets the error "Upgrade Failed" in the zigbee list.  

So what is the downside of having a wall of dimmers verses the panel lights? What happens if one of the circuits goes bad in the panel, does the whole panel get replaced?

I am looking to install a new construction C4 System in a 5500 S/F house. I have a closet with 24 centralized lights that will be controlled with keypads. At the whopping price of $180 a dimmer, has anyone tried using Insteon dimmers at only $25. I know there are insteon drivers for C4 but I wanted to hear about the down sides or issues.