Cart

Pandora always seems to cause the most bugs and issues with c4 out of all the streaming services ...

Replace it with the 800. 700s are failing like crazy 

Anyone having problems with Streaming pandora via control4 app, touch screen or remote?
 

Pandora will automatically start a station as soon as you click the Pandora Icon, not allowing you to choose a station or playlist. Then the Pandora interface completely locks up, shows the loading icon forever and never allows you to choose a station. 

When going back to the sessions screen, nothing shows playing yet but we are still hearing the randomly selected Pandora music playing. Trying to play a different source and it seems that Pandora glitch locks up the entire control4 app and doesn’t allow you to do anything until you close out of the app, reopen it and play anything but Pandora. 
 

We have experienced and replicated this exact issue on 3 separate systems today all running 3.1.2. EA 1, EA 1, and an EA-5. Reinstalling the Pandora driver does not fix it. This was also attempted on 2 different Pandora accounts. 
 

I have a customer that is requesting a certain color for a doorbird doorstation. 

This customer needs a DoorBird™ D2101V IP Video Door Station - DB-D2101V-V4A in colorway Stainless Steel V4A, Brushed, PVD Coating with Titanium Finish. 

This color along with many others can be found in-stock on doorbirds website here: https://www.doorbird.com/buy 

The only models I see on snap are the bronze and stainless steel. 

Just trying to figure out why Snap only has 2 available colors in the doorbird models?

Does anyone know if Snap in the past has had these models or carries any other color ways besides the 2 I see? https://www.snapav.com/shop/en/snapav/doorbird-ip-video-door-station-d2101v-v4a-stainless-steel-db-d2101v-v4a

Thanks!

Appears it has been once again fixed. Added thermostats and mine are working as well.

I don't have the exact lines of programming from composer but here is a few things that hopefully help :

1) Definitely use room control driver. Will make your life so much easier. 

2) For the LED's, you can program each source per the LED. When Audio Selection changes, If Pandora/IheartRadio/Whatever is selected, Then Set LED Current on keypad button you want.

3) For Cycling through sources, with room control driver It has either 4 or 5 sources you can choose in the driver properties and then connect the Audio Source Button to the room control driver Binding. It will cycle through the sources you have selected in the driver as you press the button.

Room Control Driver seems like your best friend in this project. It will save you countless hours of programming .

p>This website is using a security service to protect itself from online attacks.</p>
 

<title>Access denied | api.ecobee.com used Cloudflare to restrict access</title>
 

1 minute ago, msgreenf said:

The update they pissed last week in v13 didn't fix it?

It fixed it for about a week but I went to do an ecobee install this morning using V13 and same pin issue. It appears the ones in my project at home broke as well. 

  ERROR: Polling INACTIVE
 
         == PROPERTIES ==
  Driver Information: 
  Debug Mode: On
  PIN Code: Click "Request PIN Code" under actions tab.
  Driver Version: 13
 
         == ECOBEE DEVICES ==
  ERROR: NO DEVICES FOUND!
----------- DEBUG END ----------
 

Will keep showing this and "ecobee.com API blocked"

Same problem right now on a customer as well.

Talked to level 2 support and they basically said Ecobee is at fault and Control4 is waiting for a fix from them.

If anyone gets any updates please let me know

8 hours ago, MartynR said:

hi there , i am also looking for programmer. i have had my system in stalled for over 12 months and my 'official Control 4 ' installer is just not able to program some really basic things like putting ;lights on and off at certain times of day. i think these should be simple to do. but i have finally given up trying to work with this man and now looking for someone who can jump in and set this system up as it should be . HELP!

i am based in Oviedo near Orlando if that helps, but think it can be done remotely

 

PM Sent

For starters, Check In Iphone settings find control4 app and make sure notifications for that app are set to what you want.... banner, popup ect.... 

I agree with above, sounds definitely like a common zigbee issue.

Check your Zigbee signals and your mesh coverage of your home. That is where you will most likely find your problem.

There are loads of great programmers on here but I would be happy to take a look. 

Send me a PM if you are interested...

Congrats! Wish you the best

EDIT: put CA-1 on it's own separate zigbee mesh (best practice is to always have full zigbee coverage by adding more zigbee servers(Too many hops can eventually slow down a mesh)) 

Z2IO has a temp and humidity sensor.

As Mitch said, Ecobee is my recommendation. 

Great free drivers and their thermostats are great.

Make sure all your connections in that room are correct. What are your end points?

Just sent you a pm

1 hour ago, Billy Dean said:

Where can you get composer home edition?

From a dealer 

Just sent you a PM

Yes anytime you want to program a remote function or button, program from the room so that if you have multiple remotes in that room you don't need to program each individually. 

Program from the room the remote is in not from the AVR or  the remote.

When Command Mute is Executed > Send pause command to Room.

Ah I see what I missed. No current variable to do this as said above.

 { When the wake/sleep is executed (Room) > Then Announcement Executes } should do the trick if I read your question right