Auxillary keypad C4-KA LED indicator ?

[drmark12pa]

Does the C4 auxiliary keypad KA have LEDs that indicate if the light is on/off?  From what I'm seeing in programming is that this is basically a "dumb" switch with no LEDs to indicate if the light it's controlling in a 3 way setup is on or off ...

[cidle323]

Correct, no Leds on the KA keypad, it is just a  "slave" device.

A KC120277 configurable keypad is a great upgrade from the KA. 

[drmark12pa]

1 hour ago, cidle323 said:

Correct, no Leds on the KA keypad, it is just a  "slave" device.

A KC120277 configurable keypad is a great upgrade from the KA. 

I do have a few of the configurable keypads which are great but for this specific location I only need a switch as part of a 3 way scenario.... I didn't realize the auxillary keypad doesn't follow the load however.

[Cyknight]

13 hours ago, drmark12pa said:

I do have a few of the configurable keypads which are great but for this specific location I only need a switch as part of a 3 way scenario.... I didn't realize the auxillary keypad doesn't follow the load however.

config keypad can be used with a rocker, or a standard c4 switch can be set to do a 2-button' behaviour as alternatives - assuming it's possible to wire for this setup of course (generally possible, but there's odd ones out)